The UK Home Automation Archive

Archive Home
Group Home
Search Archive


Advanced Search

The UKHA-ARCHIVE IS CEASING OPERATIONS 31 DEC 2024

Latest message you have seen: [HELP] Very inexpensive Speaker Switching


[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

RE: Checking whether a TV is not on



I had one of these sensors on my TV for the last 4 years, and in all that
time, I could *never* get it to descriminate between fully on, and on in
standby, and even worse, it never actually detected the set being switched
off by its hard on/off button on the front panel...

The only thing it did detect was the set being switched off/unplugged at
the
wall socket....

I wouldn't recommend this device for this application...

I have heard mention before of various techniches for detecting the on
status of a TV, often involving using the headphone socket, or perhaps a
spare SCART socket... - presumably detecting the presence or otherwise of
an
audio or video signal, or maybe one of the SCART status pins... Keith D
will
know much more about what's possible with this approach....

Paul G.



>From: "Kevin Hawkins" <lists@xxxxxxx>
>Reply-To: ukha_d@xxxxxxx
>To: <ukha_d@xxxxxxx>
>Subject: RE: [ukha_d] Checking whether a TV is not on
>Date: Mon, 13 Oct 2003 13:12:17 +0100
>
>There are some current sensor type probes available that can tell you
via a
>'logic' type output whether any mains powered device is ON or OFF. LA I
>think do them as do the Comfort people - and I think maybe Xantech ??
>
>The mains cable needs dividing such that only one of the conductors
(live
>OR
>the neutral) passes through the sensor, which is a small current
>transformer
>- (looks like a large polo mint).
>
>The sensitivity of the ONOFF sensing can be adjusted by how many loops
of
>the mains wire are made around the current transformer (polo mint).  In
>your
>case of a device like a TV that always draws current (even in standby)
you
>will need to experiment such that it shows OFF in 'Standby' but 'ON' in
>use.
>I guess the sensors provide a spec as to what minimal current turns
them to
>the ON state (with a single wire pass through the sensor) - and you
could
>check this against the current drawn in standby by your TV, which must
be
>less than this or the device would show ON permanently.
>
>	Kevin
>
>
>
>    > -----Original Message-----
>    > From: Ian Tresman [mailto:ian@xxxxxxx]
>    > Sent: 13 October 2003 12:03
>    > To: AutomatedHome UK
>    > Subject: [ukha_d] Checking whether a TV is not on
>    >
>    > There are X10 devices that will tell me whether a device is on
or
>off.
>    >
>    > But is there anything that will tell me electronically whether
a TV
>is
>    > not
>    > on, ie. off, or on standby?
>    >
>    > And then is there anything that will allow the remote
switching of a
>TV
>    > (or
>    > other device) to stand-by mode?
>    >
>    > Regards,
>    > Ian Tresman
>    >
>    >   ----------
>    >
>    >
>    > ---
>    > Outgoing mail is certified Virus Free.
>    > Checked by AVG anti-virus system (http://www.grisoft.com).
>    > Version: 6.0.525 / Virus Database: 322 - Release Date:
09/10/2003
>    >
>    >
>    > [Non-text portions of this message have been removed]
>    >
>    >
>    >
>    > ------------------------ Yahoo! Groups Sponsor
>---------------------~--
>    > >
>    > The decade¿s best-selling Family Tree Maker software is at
>    > Genealogy.com.
>    > Share your family tree with Family Tree Maker 11. Now at
>Genealogy.com
>    > Build a better family tree! Get Family Tree Maker 11 at
Genealogy.com
>    > http://us.click.yahoo.com/cD_AeD/061GAA/a8ILAA/IBOolB/TM
>    >
>---------------------------------------------------------------------~-
>    > >
>    >
>    > UKHA 2004: 15th and 16th May 2004
>    >
>    > http://www.automatedhome.co.uk
>    > Post message: ukha_d@xxxxxxx
>    > Subscribe:  ukha_d-subscribe@xxxxxxx
>    > Unsubscribe:  ukha_d-unsubscribe@xxxxxxx
>    > List owner:  ukha_d-owner@xxxxxxx
>    >
>    > Your use of Yahoo! Groups is subject to
>    > http://docs.yahoo.com/info/terms/
>
>
>
>
>UKHA 2004: 15th and 16th May 2004
>
>http://www.automatedhome.co.uk
>Post message: ukha_d@xxxxxxx
>Subscribe:  ukha_d-subscribe@xxxxxxx
>Unsubscribe:  ukha_d-unsubscribe@xxxxxxx
>List owner:  ukha_d-owner@xxxxxxx
>
>Your use of Yahoo! Groups is subject to http://docs.yahoo.com/info/terms/
>
>

_________________________________________________________________
Hotmail messages direct to your mobile phone http://www.msn.co.uk/msnmobile



Home | Main Index | Thread Index

Comments to the Webmaster are always welcomed, please use this contact form . Note that as this site is a mailing list archive, the Webmaster has no control over the contents of the messages. Comments about message content should be directed to the relevant mailing list.