The UK Home Automation Archive

Archive Home
Group Home
Search Archive


Advanced Search

The UKHA-ARCHIVE IS CEASING OPERATIONS 31 DEC 2024

Latest message you have seen: RE: HA and X10 shops


[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

RE: Tivo / Sky+/pioneer dvr-5100hs


  • To: <ukha_d@xxxxxxx>
  • Subject: RE: Tivo / Sky+/pioneer dvr-5100hs
  • From: "Rob Mouser" <rmouser@xxxxxxx>
  • Date: Mon, 27 Oct 2003 08:40:42 -0000
  • Mailing-list: list ukha_d@xxxxxxx; contact ukha_d-owner@xxxxxxx
  • Reply-to: ukha_d@xxxxxxx

Blimey! No software at all then?
1 partition?=20
NTFS/FAT16/FAT32?
Formatted?
=20

Many thanks

Rob Mouser=20



-----Original Message-----
From: Kenneth Watt [mailto:kwatt@xxxxxxx]=20
Sent: 27 October 2003 08:40
To: ukha_d@xxxxxxx
Subject: RE: [ukha_d] Tivo / Sky+/pioneer dvr-5100hs

> Any links to a how-to or FAQ on this K.? Also can it be done so that
if
> your Sky+ box develops a fault you can whack the original drive back
in
> before the engineer arrives :-) Been a few posts on flaky Sky+ boxes
and
> don't fancy being lumbered with a =A3200 paper weight!

I did have one but it isn't really needed as it is, quite literally, a case
of swapping the drives out, no more. Just make sure you have a quiet 5400
rpm drive to put in there as I found a 7200 rpm one noisy and far too hot
for my liking.

That's another thing about Sky+ what does my head in, it's a noisy bugger
compared with TiVo too so I have "modded" the case with some
sound deadenin=
g
but it's still not too quite. :/

K.



UKHA 2004: 15th and 16th May 2004

http://www.automatedhome.co.uk=20
Post message: ukha_d@xxxxxxx=20
Subscribe:  ukha_d-subscribe@xxxxxxx=20
Unsubscribe:  ukha_d-unsubscribe@xxxxxxx=20
List owner:  ukha_d-owner@xxxxxxx=20

Your use of Yahoo! Groups is subject to http://docs.yahoo.com/info/terms/=20




Home | Main Index | Thread Index

Comments to the Webmaster are always welcomed, please use this contact form . Note that as this site is a mailing list archive, the Webmaster has no control over the contents of the messages. Comments about message content should be directed to the relevant mailing list.