[Message Prev][Message
Next][Thread Prev][Thread Next][Message
Index][Thread Index]
RE: Voltage detectors?
- Subject: RE: Voltage detectors?
- From: "Ward, David" <DAvid.Ward@xxxxxxxxxx>
- Date: Wed, 14 Apr 2004 11:28:05 +0100
IIRC see the April EPE Mag http://www.epemag.wimborne.co.uk/
for a simple
project that does what you describe
Dave
-----Original Message-----
From: Dan Lowe [mailto:ukha@xxxxxxx]
Sent: 14 April 2004 11:15
To: ukha_d@xxxxxxx
Subject: [ukha_d] Voltage detectors?
Hi folks,
Anyone seen a non-intrusive voltage detector around? Thinking about
something similar to those "pens", but with a usable output
which can be
hooked upto a sensor board (eg the barionet).
My problem is that I take my mains incomer into my switchover panel for a
generator, then onto my UPS kit. If the power fails, the UPS tells me it
sees the loss between power going and generator starting, but after the
generator is engaged, I don't know if mains is present or not. The switch
over panel has no usable outputs for me, so was looking for a non-intrusive
sensor (sitting on the UPS power of course!) to watch for mains.
-dan
UK Home Automation Meet 2004 - BOOK NOW!
http://www.ukha2004.com
http://www.automatedhome.co.uk
Member Offers - http://www.freeranger.co.uk/ukha
UKHA_D Main Index |
UKHA_D Thread Index |
UKHA_D Home |
Archives Home
|