Re: Project vaults

["Simon Rafferty" <simonr@xxxxxxx>]

Ideally a cinema, because it relies on amplified sound and not
architectural acoustics should be pretty dead. If you find that it sounds a
bit hard or echoey in their i would recommend running some carpet up the
walls. Looking at the size of the room , if you are goig to have any
problems in will be in the upper mid-range and higher frequencies. I would
seriously suggest soft furnishing the wall opposite the viewing end as this
will be the most critical, maybe something like a curtain across the back.

Simon
----- Original Message -----
From: Paul Gale
To: ukha_d@xxxxxxx
Sent: Friday, April 30, 2004 8:52 AM
Subject: RE: [ukha_d] Project vaults


I guess if worst case - you could always treat the walls with some
acoustic foam/pads although I guess you don't have much room?

Paul


-----Original Message-----
From: Young, Jeff [mailto:Jeff.Young@xxxxxxx]
Sent: 30 April 2004 08:50
To: ukha_d@xxxxxxx
Subject: RE: [ukha_d] Project vaults

Not sure so far.  Still in that really echoy stage with lots of bare
floors
and walls.  Plan is to install a nice think carpet and a few book shelfs
and
cupboards on the flat walls so that should absorb some sound.  Not sure
how
the surround speakers are going to sound yet.  Just ordered 4 x LD11 for
the
lighting :-).

-----Original Message-----
From: Paul Gale [mailto:groups@xxxxxxx]
Sent: 30 April 2004 08:34
To: ukha_d@xxxxxxx
Subject: RE: [ukha_d] Project vaults


How do you find the acoustics in there already?

Paul


-----Original Message-----
From: Young, Jeff [mailto:Jeff.Young@xxxxxxx]
Sent: 30 April 2004 07:50
To: ukha_d@xxxxxxx
Subject: [ukha_d] Project vaults

Just a small update on project vaults.

More cabling in
Floor in
Plasterboarding started

http://www.eyesociety.co.uk/vaults/index.html

Jeff


------------------------------------------------------------------------
--------
The information contained herein is confidential and is intended solely
for
the addressee. Access by any other party is unauthorised without the
express
written permission of the sender. If you are not the intended recipient,
please contact the sender either via the company switchboard on +44
(0)20
7623 8000, or via e-mail return. If you have received this e-mail in
error
or wish to read our e-mail disclaimer statement and monitoring policy,
please refer to
http://www.drkw.com/disc/email/
or contact the sender.
------------------------------------------------------------------------
--------




UK Home Automation Meet 2004 - BOOK NOW! http://www.ukha2004.com

http://www.automatedhome.co.uk

Member Offers - http://www.freeranger.co.uk/ukha