The UK Home Automation Archive

Archive Home
Group Home
Search Archive


Advanced Search

The UKHA-ARCHIVE IS CEASING OPERATIONS 31 DEC 2024

Latest message you have seen: Tech advice needed


[Message Prev][Message Next][Thread Prev][Thread Next][Message Index][Thread Index]

RE: [OT] DA / Abacus Burglar Alarms


  • Subject: RE: [OT] DA / Abacus Burglar Alarms
  • From: "Steve Morgan" <smorgo@xxxxxxxxxxxxx>
  • Date: Sat, 7 Aug 2004 09:01:21 +0100

Thanks, Neil.

It seems kind of obvious, thinking about it. After all, it's the original
battery which makes it about 8 years old, now.

I've just put a new one in. Charging voltage is 13.5V, which sounds about
right to me.

Cheers,
Steve

> -----Original Message-----
> From: Neil Fuller [mailto:neil@xxxxxxx]
> Sent: 07 August 2004 08:08
> To: ukha_d@xxxxxxx
> Subject: Re: [ukha_d] [OT] DA / Abacus Burglar Alarms
>
> Steve
>
> The battery has probably died. Chances are, if you replace
> the battery, all will be OK.
>
> If you do replace the battery, when you turn the unit on, be
> sure to check the charging volts to be certain it's not a PSU fault.
>
> HTH
>
> Regards
>
> Neil





UKHA_D Main Index | UKHA_D Thread Index | UKHA_D Home | Archives Home

Comments to the Webmaster are always welcomed, please use this contact form . Note that as this site is a mailing list archive, the Webmaster has no control over the contents of the messages. Comments about message content should be directed to the relevant mailing list.