[Message Prev][Message
Next][Thread Prev][Thread Next][Message
Index][Thread Index]
RE: [OT] ntl Pace 4000
- Subject: RE: [OT] ntl Pace 4000
- From: "Graham Kiff" <kiff@xxxxxxxxxxxxx>
- Date: Wed, 11 Aug 2004 23:02:20 +0100
Have you tried powering it off.
Also try removing and re-inserting the viewing card.
Failing that, I had a similar problem, because I'd moved my box, thus
increasing the cable length - they said the signal the box was getting
was too week, so had to boost my signal (config from their end)
Cheers
Graham
-----Original Message-----
From: aashram [mailto:groups@xxxxxxx]
Sent: 11 August 2004 21:23
To: ukha_d@xxxxxxx
Subject: [ukha_d] [OT] ntl Pace 4000
I seem to be having a problem on my ntl digital setup box linked to my
tivo.
For some reason it will only let me navigate few channels. If I use the
ch+ button
it goes in the sequence 1,2,3,4,5,6,7,74,202,904
Don't know why. Is there somethingI can do to reset it before calling in
NTL who
are closed at the moment till 8am tomorrow ?
UKHA_D Main Index |
UKHA_D Thread Index |
UKHA_D Home |
Archives Home
|