Re: TM13 Tranceiver

["david_dabs" <david_dabs@xxxxxxxxxxx>]

Oops - It should have been house code P  my mistake.


--- In ukha_d@xxxxxxx, "david_dabs" <david_dabs@y...>
wrote:
> I wonder if someone can explain this to me, I have had for some
> months, probably more than a year a TM13 receiver set to house
code
> A, almost all the appliance and light modules are on A.  I had the
> MS13E's and keyfobs set to J and C (as A is completly full)  The
> TM13 module accepted commands from A,C and J without problem and
> relayed the command.  This unit was unplugged for a while and when
> plugged back in no longer worked (fuse OK etc)  A spare TM13 was
> plugged in at the same socket on house code A and everything on A
> works fine, its Just C and J that dont (except if you change the
> house code to C or J and then its fine.)
>
> So it looks to me like I need to purchase a second TM13 and put
the
> MS13E's and keyfobs on one house code (as A is full) but that
seems
> daft since everything was working fine for so long?
>
> Any sense to this mess would be a great help, as for a while I
> thought I was going mad.