RE: Re: TM13 Tranceiver

["Phil Harris" <phil@xxxxxxxxxxx>]

Yup - your oringinal TM13 was an All Housecode one and the current one is a
standard one (single housecode)...

Phil

> -----Original Message-----
> From: david_dabs [mailto:david_dabs@xxxxxxx]
> Sent: 21 August 2004 22:13
> To: ukha_d@xxxxxxx
> Subject: [ukha_d] Re: TM13 Tranceiver
>
> Oops - It should have been house code P  my mistake.
>
>
> --- In ukha_d@xxxxxxx, "david_dabs" <david_dabs@y...>
wrote:
> > I wonder if someone can explain this to me, I have had for some
> > months, probably more than a year a TM13 receiver set to house
> code
> > A, almost all the appliance and light modules are on A.  I had
the
> > MS13E's and keyfobs set to J and C (as A is completly full)  The
> > TM13 module accepted commands from A,C and J without problem and
> > relayed the command.  This unit was unplugged for a while and
when
> > plugged back in no longer worked (fuse OK etc)  A spare TM13 was
> > plugged in at the same socket on house code A and everything on A
> > works fine, its Just C and J that dont (except if you
> change the house
> > code to C or J and then its fine.)
> >
> > So it looks to me like I need to purchase a second TM13 and put
> the
> > MS13E's and keyfobs on one house code (as A is full) but that
> seems
> > daft since everything was working fine for so long?
> >
> > Any sense to this mess would be a great help, as for a
> while I thought
> > I was going mad.
>
>
>
> ------------------------ Yahoo! Groups Sponsor
> --------------------~-->
> $9.95 domain names from Yahoo!. Register anything.
> http://us.click.yahoo.com/J8kdrA/y20IAA/yQLSAA/IBOolB/TM
> --------------------------------------------------------------
> ------~->
>
>
>
> Yahoo! Groups Links
>
>
>
>
>
>