[Message Prev][Message
Next][Thread Prev][Thread Next][Message
Index][Thread Index]
X10 LM11 Din dimming module advice needed
- Subject: X10 LM11 Din dimming module advice needed
- From: "darren_karp2001" <darren@xxxxxxxxx>
- Date: Fri, 17 Dec 2004 17:46:56 -0000
If I install 4 of these modules in my consumer unit can I control
each circuit via my pronto remote and X10 mini controller? The
reason why I ask is that I have read that the LM11 'MUST' be
connected to a momentary switch. I do of course want to
have 'manual / SWMBO' control and again advice on this would be
welcomed. We want to have a wall plate in brushed stainless / satin
silver finish but what I don't want is to have to 'cycle' through
dim to bright, etc. which apparently happens if you use momentary
switches; instead is there some kind of wall plate which has a
seperate dim and brighten button? along with of course one for
on/off?
I'm using LV Halogen in each of the 4 zones with a maximum of 400W
per zone.
Many thanks
Darren
UKHA_D Main Index |
UKHA_D Thread Index |
UKHA_D Home |
Archives Home
|