Re: Sorry to harp on but.....

["darren_karp2001" <darren@xxxxxxxxx>]

Yeah this is the unit I saw but wasn't certain if this was right for
me as it would appear to be designed for someone with two digiboxes
from one dish. I know this is 'similar' to what I want to do but
need clarification as apparently one of the inputs to the splitter
is used to power it and as I want the flexibility to move the sky
box from zone 1 to zone 2 need to ensure it'll work.....

HELP!!!!!!!!!!!



--- In ukha_d@xxxxxxx, "Ian" <ian@f...> wrote:
> Well spotted. I actually have this one: http://tinyurl.com/3udvk
>
> -----Original Message-----
> From: darren_karp2001 [mailto:darren@a...]
> Sent: 22 December 2004 19:54
> To: ukha_d@xxxxxxx
> Subject: [ukha_d] Re: Sorry to harp on but.....
>
>
>
> Hi Ian,
>
> It would appear that both those maplin splitters are not suitable
for
> satellite (according to their description). Are you sure of this?
>
> Darren
>
>
> --- In ukha_d@xxxxxxx, "Ian" <ian@f...> wrote:
> > Probably not - the losses are too high going through those face
> plates.
> >
> > I have a situation similar to what you describe - I can plug my
> digibox in
> > downstairs in the living room, or upstairs at node zero.
> >
> > The feed from my dish is split using one of these -
> http://tinyurl.com/6lj3g
> > (or you could use this: http://tinyurl.com/5y42l  but don't use
> the four way
> > unless you need it!)
> >
> > The cables then run onward to node zero and the living room. The
> next
> > important thing is at the wall - DON'T use the cheepo
faceplates -
> unless
> > your signal strength is top notch, they will give lots of little
> sparkly
> > noise and mpeg frame breakups (or at least, they did for me)
> >
> > The best way to get the cable out into the room is to use a blank
> faceplate,
> > drill a hole in it, and use  one of these:
> http://tinyurl.com/44y3l to
join
> > the Cable - the F plugs allow the actual copper core to run as
> uninterrupted
> > as possible from the dish to your digibox.
> >
> > Hope that helps!
> >
> > Ian.
> >
> >
> >
> > -----Original Message-----
> > From: darren_karp2001 [mailto:darren@a...]
> > Sent: 22 December 2004 18:53
> > To: ukha_d@xxxxxxx
> > Subject: [ukha_d] Sorry to harp on but.....
> >
> >
> >
> > Hi All,
> >
> > Sorry for another post on the same subject but with Xmas looming
> tomorrow is
> > the only opportunity I will get to go and buy the cable and bits
I
> need....
> >
> > Can somebody advise whether http://www.maplin.co.uk/Search.aspx?
> > MenuNo=903&MenuName=WALL+Plates&FromMenu=y&doy=22m12
will provide
> me with
> > two areas with which I could possibly place my Sky digibox. To
> reiterate, I
> > don't want two digiboxes running at the same time but two
possible
> locations
> > to house it.
> >
> > I'm looking for a plug 'n play low-cost solution and though that
> the maplin
> > product may surfice.
> >
> > TIA
> > Darren
>
>
>
>
>
> ------------------------ Yahoo! Groups Sponsor --------------------
~--> Make
> a clean sweep of pop-up ads. Yahoo! Companion Toolbar.
> Now with Pop-Up Blocker. Get it for free!
> http://us.click.yahoo.com/L5YrjA/eSIIAA/yQLSAA/IBOolB/TM
> -------------------------------------------------------------------
-~->
>
>
> Yahoo! Groups Links