The UK Home Automation Archive

Archive Home
Group Home
Search Archive


Advanced Search

The UKHA-ARCHIVE IS CEASING OPERATIONS 31 DEC 2024


[Message Prev][Message Next][Thread Prev][Thread Next][Message Index][Thread Index]

RE: Re: PC PSU


  • Subject: RE: Re: PC PSU
  • From: "Keith Doxey" <ukha@xxxxxxxxxxx>
  • Date: Mon, 27 Dec 2004 17:02:42 -0000


Hi Malcolm


>
> The difference in amps between the two PSUs is only marked on the
> 12v rail.
>
> They compare as:
>
> QTechnology   +3.3v (30a)  +5v (30a)  +12v (29a)

3.3 * 30 = 99W	5 * 30 = 150W  12 * 29= 348W

> Silentmaxx    +3.3v (29a)  +5v (36a)  +12v (19a)

3.3 * 29 = 95.7W (call it 96)  5 * 36 = 180


> I also note that their specs list Combined Maximum Output at +3.3v /
+5v.
> For the QTechnology it's 235w

99 + 150 = 249W so they cant both be fully loaded as this exceeds the 235W
maximum

> and for the Silentmaxx it's 276w.

96 + 180 = 276W so both these could be fully loaded.

> Given the above I'd almost think that +12v figure for the
> SilentMaxx unit is a typo and may be 29a too(?).
>

Depends on the total rating for the PSU.
You havent mentioned what they are but from above

Qtechnology = 235 (max for 3.3+5) + 348 = 583W

SilentMaxx = 276 (max for 3.3+5) + 228 = 504W (Assuming 19A @ 12V is
correct)
or	276 (max for 3.3+5) + 348 = 624W (If 29A @ 12V if a typo which I doubt)

>From searching I have found a page listing the SilentMaxx 503 so I
guess it
is 19A.

Regards

Keith




UKHA_D Main Index | UKHA_D Thread Index | UKHA_D Home | Archives Home

Comments to the Webmaster are always welcomed, please use this contact form . Note that as this site is a mailing list archive, the Webmaster has no control over the contents of the messages. Comments about message content should be directed to the relevant mailing list.