[Date Prev][Date
Next][Thread Prev][Thread Next][Date
Index][Thread Index]
Re: Modulator audio problem
On Tue, 2004-02-10 at 10:57, steve@xxxxxxx:
> I use a modulator to route a cctv camera (babycam) around the house,
> the only problem is the audio.
>
> The camera doesn't have an audio out so the audio inputs on the
> modulator are not used, this results in interference in the form of
> random pops and whistles.
>
> Can I get anything to plug into these inputs to silence them?
>
> Cheers
>
> Steve
Get a plug that fits the audio socket, solder the pin and the earth
together, plug that in. Simple. If you're really really fussy, solder
a 100 ohm resistor between the pin and earth.
Gordon.
UK Home Automation Meet 2004 - BOOK NOW!
http://www.ukha2004.com
http://www.automatedhome.co.uk
Post message: ukha_d@xxxxxxx
Subscribe: ukha_d-subscribe@xxxxxxx
Unsubscribe: ukha_d-unsubscribe@xxxxxxx
List owner: ukha_d-owner@xxxxxxx
Home |
Main Index |
Thread Index
|