[Date Prev][Date
Next][Thread Prev][Thread Next][Date
Index][Thread Index]
RE: CCTV cable Q
- To: <ukha_d@xxxxxxx>
- Subject: RE: CCTV cable Q
- From: "Hawes,Timothy Edward (GEG)" <haweste@xxxxxxx>
- Date: Tue, 30 Dec 2003 21:43:29 -0000
- Mailing-list: list ukha_d@xxxxxxx; contact
ukha_d-owner@xxxxxxx
- Reply-to: ukha_d@xxxxxxx
Mark,
A bit of a belated reply . . .
How did you wire it up onto Cat5 ? i.e. which cores did you use ? I presume
you used one pair for the video out, then power over one / two other pairs,
or did you split the video signal and ground across separate pairs ?
Thanks,
Tim H.
> -----Original Message-----
> From: Mark McCall Sent: 22 December 2003 09:14
>
> In my experience it depends on length, and where the cables
> run. I have a
> cam at our back door on CAT5 - it only has maybe 7 metres to
> run to Node 0
> and the picture is fine. The camera at the front door is
> also CAT5 but more
> like a 20 metre run and it looks terrible. If you must use
> CAT5 for long
> runs then look at www.kat5.com
>
> M.
+
UKHA 2004: 15th and 16th May 2004
EARLY BIRD RATE EXPIRES 31/12/03!
http://www.ukha2004.com
http://www.automatedhome.co.uk
Post message: ukha_d@xxxxxxx
Subscribe: ukha_d-subscribe@xxxxxxx
Unsubscribe: ukha_d-unsubscribe@xxxxxxx
List owner: ukha_d-owner@xxxxxxx
Home |
Main Index |
Thread Index
|