[Date Prev][Date
Next][Thread Prev][Thread Next][Date
Index][Thread Index]
1-wire on structured cableing
- To: ukha_d@xxxxxxx
- Subject: 1-wire on structured cableing
- From: Stuart Grimshaw <stuart@xxxxxxx>
- Date: Thu, 15 Jan 2004 16:55:57 +0000
- Mailing-list: list ukha_d@yahoogroups.com; contact
ukha_d-owner@xxxxxxx
- Reply-to: ukha_d@xxxxxxx
Ayone using their structured cableing with 1-wire devices attached to the
end
of runs?
I tried back at my old gaff by crimping a DS1820 into a RJ45 plug and
putting
that into the patch panel in the loft. It seemed to work OK.
My plan was to assign some ports on the panel to be 1-wire only and tie
each
of the pins on the ports in question together. That way each cable plugged
into the panel would be in paralell and I could just pick a pair and add
the
1-wire device to it.
I nevver got around to testing it at any great length, has anyone done
anything similar?
--
-S
UK Home Automation Meet 2004 - BOOK NOW!
http://www.ukha2004.com
http://www.automatedhome.co.uk
Post message: ukha_d@yahoogroups.com
Subscribe: ukha_d-subscribe@yahoogroups.com
Unsubscribe: ukha_d-unsubscribe@yahoogroups.com
List owner: ukha_d-owner@yahoogroups.com
Home |
Main Index |
Thread Index
|