The UK Home Automation Archive

Archive Home
Group Home
Search Archive


Advanced Search

The UKHA-ARCHIVE IS CEASING OPERATIONS 31 DEC 2024


[Message Prev][Message Next][Thread Prev][Thread Next][Message Index][Thread Index]

RE: Composite Cable


  • Subject: RE: Composite Cable
  • From: "Clive Haycock" <clive@xxxxxxxxxxxx>
  • Date: Mon, 28 Jun 2004 12:30:41 +0100

Rob,
If your friend wants good quality cable then I would recommend PSF 1/3M
that is a broadcast cable. I buy this from Bryant Broadcast Ltd. http://www.bryant-broadcast.co.uk/
The cable is part number MVC 333C and this will cost about 51p per metre +
VAT for a 100m reel. They do not sell online so you will have to phone them
on 020 8404 4050.
They also sell crimp BNC connectors & strain relief boots for this
cable.
You can find out more on the cable by downloading section 5 of their
catalogue from their website

Hope this helps

Clive

-----Original Message-----
From: Rob Mouser [mailto:groups@xxxxxxx]
Sent: 28 June 2004 10:37
To: ukha_d@xxxxxxx
Subject: [ukha_d] Composite Cable

Helping a friend wire his new house soon. CAT5 and speaker cable sorted but
he wants to hard wire for a Composite video signal to some rooms from node
0. (Yes I know he can use KAT5 and S-video would be better :-)) His choice
is composite though and he wants to hard wire. Can anyone advise on a
suitable cable? Would need a 100m drum or equivalent. CPC Perhaps?



Many thanks



Rob





[Non-text portions of this message have been removed]







UKHA_D Main Index | UKHA_D Thread Index | UKHA_D Home | Archives Home

Comments to the Webmaster are always welcomed, please use this contact form . Note that as this site is a mailing list archive, the Webmaster has no control over the contents of the messages. Comments about message content should be directed to the relevant mailing list.