The UK Home Automation Archive

Archive Home
Group Home
Search Archive


Advanced Search

The UKHA-ARCHIVE IS CEASING OPERATIONS 31 DEC 2024

Latest message you have seen: Re: Help... TiVo died on the operating table


[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

Re: Interfacing With Ethernet



sounds good... ethernet enabling a temperature sensor (quasar=20
electronics etc) would be useful...  I'm sure other folks have MANY=20
ideas of useful applications - getting a poll of interested people=20
and more importantly how much they are willing to spend per unit=20
would be a good start.  After that photos or video of a prototype=20
unit doing 'stuff' would be great.

Matt

--- In ukha_d@xxxxxxx, "Iain Goodhew"
<I.C.B.Goodhew@r...>=20
wrote:
> I have done some work on interfacing to Ethernet before. It was a=20
simple
> interface between an Ethernet chip (Crystal semiconductors) and a=20
pic
> and a bit of code written in C to send and receive UDP/arp/icmp=20
packets.
> I used this to switch on/off some LED's connected to the pic=20
outputs
> under control from a vb app. That was as far as I got with it.=20
However
> if there is sufficient interest I could carry on the work and=20
produce a
> general purpose Ethernet enabled IO board or work with someone=20
else who
> want to achieve the same.
>=20
> We would need a bit of a survey to establish what people would=20
want from
> the board, and what devices would connect to it. Whether it was a=20
stand
> alone unit or just a building block to be incorporated into=20
another home
> built device.
>=20
>=20
> Iain
>=20
>=20
> -----Original Message-----
> From: steve.cooper@u... [mailto:steve.cooper@u...]=20
> Sent: 16 March 2004 10:22
> To: ukha_d@xxxxxxx
> Subject: RE: [ukha_d] Re: Interfacing With Ethernet
>=20
>=20
> Cheap ethernet control from simple micro processors is almost the=20
holy
> grail (of course we all know occupancy sensing is the true holy=20
grail) .
> Whether it is using xPL, xAP or some other protocol to do the
> communication
> it would open up cheap and reliable home automation all around the
> house.
>=20
> The numbers of units that we would consume as a group would be=20
quite a
> reasonable number so as a group I think we should make it a=20
priority to
> find a cheap solution.=A0 Surely 1200+ people on the case must
yield=20
some
> result.
>=20
> S.



UK Home Automation Meet 2004 - BOOK NOW!
http://www.ukha2004.com

http://www.automatedhome.co.uk=20
Post message: ukha_d@xxxxxxx=20
Subscribe:  ukha_d-subscribe@xxxxxxx=20
Unsubscribe:  ukha_d-unsubscribe@xxxxxxx=20
List owner:  ukha_d-owner@xxxxxxx=20

Home | Main Index | Thread Index

Comments to the Webmaster are always welcomed, please use this contact form . Note that as this site is a mailing list archive, the Webmaster has no control over the contents of the messages. Comments about message content should be directed to the relevant mailing list.