The UK Home Automation Archive

Archive Home
Group Home
Search Archive


Advanced Search

The UKHA-ARCHIVE IS CEASING OPERATIONS 31 DEC 2024

Latest message you have seen: ADSL


[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

Re: IR Receiver



Hi Mark,

I mounted one of them in the ceiling (pointing down) just drilled a
hole and tightened the bold from the back of the receiver - I stuck a
standard remote to the wall pointing upwards next to my light
switches.

This setup should be working for the bathroom (since all walls were
tiled from bottom to top I did not feel hacking my way through them
to integrate a real keypad + it's a lot safer in a bathroom this way.
(as a matter of speaking - safer all over the house since SWMBO
selected the tiles and I would not want a conflict there)

Once this is working I'll try to drill a hole in the bedroom TV to
mount the other one - alternatively I'll use it in the kithchen (same
tile problem)

I took a day off next friday to try to hook this up to a Xantech
4zone controller - wiring is already in place (I pulled some cat6 to
the attick lately so I'll have to use one of those to make it work).

rgds Rob

--- In ukha_d@xxxxxxx, "mark90h" <mark.heyhoe@v...> wrote:
> Thanks Rob,
> How did you mount them (what boxes and cable did you use) and did
> you use one of their control panels?
>
> Thanks,
> Mark
>
> --- In ukha_d@xxxxxxx, "egelbeertje" <r_d_k@h...>
wrote:
> > Just bought 2 of these and some to try to get some IR routing
done.
> > International shipment was expensive so I had them ship to a US
> > address and a friend forwarded it - no customs VAT due ;-)
> > Nice service too these people. Compared to buying the same stuff
> over
> > here would have cost 2.6 times as much.
> >
> > http://www.hometech.com/infrared/rcvrs.html#BU-IR350
> >
> > rgds Rob.
> >
> > --- In ukha_d@xxxxxxx, "mark90h"
<mark.heyhoe@v...> wrote:
> > > Hi,
> > > Anyone know of an IR receiver I can mount in a standard gang
box
> > and
> > > hard wire back to the control box using Cat5?
> > >
> > > Thanks,
> > > Mark



UK Home Automation Meet 2004 - BOOK NOW!
http://www.ukha2004.com

http://www.automatedhome.co.uk
Post message: ukha_d@xxxxxxx
Subscribe:  ukha_d-subscribe@xxxxxxx
Unsubscribe:  ukha_d-unsubscribe@xxxxxxx
List owner:  ukha_d-owner@xxxxxxx

Home | Main Index | Thread Index

Comments to the Webmaster are always welcomed, please use this contact form . Note that as this site is a mailing list archive, the Webmaster has no control over the contents of the messages. Comments about message content should be directed to the relevant mailing list.