[Date Prev][Date
Next][Thread Prev][Thread Next][Date
Index][Thread Index]
RE: Momentary Light Switches?
> -----Original Message-----
> From: Stephen Houston Sent: 17 March 2004 22:07
>
> Hi All,
>
> I've been trying (without success) to find a supplier for normal
> looking (i.e. white plastic, brass, metal) momentary light switch to
> control my LD11. Is there an alternative to using clipsil modular
> switches?
Hi Steve,
If it's brass or stainless you're after, try these:
http://www.letsautomate.com/brass.cfm
I went through a similar exercise just recently and got lots of good
suggestions. Look for posts titled "Momentary switch source"
dated from 13th Feb 04 to see all the posts. You can try to search through
the Yahoo archives, but this place is much better: http://www.ukha-archive.com/
Thanks to some advise from here I bought one of these in the end as it
suited what I wanted very cheaply :-)
http://www.mkelectric.co.uk/products/item.asp?itemid=4198&rangeid=1030
HTH,
Tim H.
+
Home |
Main Index |
Thread Index
|