[Message Prev][Message
Next][Thread Prev][Thread Next][Message
Index][Thread Index]
RE: Occupancy Detection
- Subject: RE: Occupancy Detection
- From: "Nigel Giddings" <nigel@xxxxxxxxxxxxxx>
- Date: Fri, 19 Nov 2004 21:25:12 -0000
Frank,
I too had looked at these PIRs. Would be very interested in reports of
how good they are.
Nigel
-----Original Message-----
From: Frank Mc Alinden [mailto:fmcalind@xxxxxxx]
Sent: 19 November 2004 21:22
To: ukha_d@xxxxxxx
Subject: [ukha_d] Occupancy Detection
Hi All
Im currently using my security pirs for Security and Occupancy
detection but find that they are not responsive enough for Occupancy
detection at times .....Im thinking of using a little 5v pir head and
connect it into my Probe system (no need for further wiring)....The
Probe system normally reports the status of Probes when
"Requested" this
obviously isnt suitable ...so i intend to dedicate Probe 6 in each Zone
for "Occupancy Pir" and then continually Poll probe 6 on each
zone and
report back to Homevision / xPL via the i/o and serial interfaces the
status of each pir.... and hopefully i will have a more reliable
Occupancy detection system....So im hoping the little pir heads are
quite sensitive..
Check out the link for the little pir heads...under security and
survellience part number k76 http://www.ozitronics.com/
More Soon
Frank
UKHA_D Main Index |
UKHA_D Thread Index |
UKHA_D Home |
Archives Home
|