[Message Prev][Message
Next][Thread Prev][Thread Next][Message
Index][Thread Index]
RE: RJ45 Wall sockets
- Subject: RE: RJ45 Wall sockets
- From: "Paul Smith" <ukha@xxxxxxxxxxxxx>
- Date: Fri, 1 Apr 2005 13:24:55 +0100
HI Guys,
Thanks for the support, but what I was thinking is how one can test that i=
t's up to gigabit. I don't want to spend load on a tester. So thought
using=
gigabit certified cables and patch panel type sockets would mean that it w=
as.
Regards,
Paul
-----Original Message-----
From: Simon McCaughey [mailto:simonmcc@xxxxxxx]=20
Sent: 01 April 2005 13:12
To: ukha_d@xxxxxxx
Subject: Re: [ukha_d] RJ45 Wall sockets
On Apr 1, 2005 12:17 PM, Malcolm Lansell <mlansell@xxxxxxx> wrote:
>=20
> It will probably easier just to "do it right" and use the
normal punch do=
wn
> method.
> Terminating cat5e cables on punch down blocks is really fast if you
buy t=
he
> proper tool (which cost < =A320)
>=20
I agree, its a bit scary if you've never done it before, but once you
do 10 or 20 it gets simpler. Getting the first one punched down and
tested took the longest for me, after that its just a copying job....
HTH
Simon
=20
UKHA_D Main Index |
UKHA_D Thread Index |
UKHA_D Home |
Archives Home
|