RE: Installing plasma/lcd mounts

["White, Peter" <peter.white@xxxxxxxxxxxxx>]

Thanks.  The installs are nearly all going to be into existing properties.
Initially we're only looking at LCD panels up to 27", but it's only a
matter
of time before they grow, and/or we start on plasma's as well.

Pete

_____

From: Neil Ball [mailto:neilball@xxxxxxx]
Sent: 18 April 2005 13:47
To: ukha_d@xxxxxxx
Subject: RE: [ukha_d] Installing plasma/lcd mounts


Are these installs retrofits into existing properties or for new builds. If
it's new builds then the trick is to get the builders to install a decent
ply board between the joists where the plasma is to be mounted before
sheeting over. For dry lined walls & screens at 42" or below then
the heavy
duty plasterboard fixings can be used but it always seems so flimsy due to
the weakness of the plasterboard itself. If the screen is 50" or on an
articulated bracket then the only option is to open up the wall to
reinforce
it and make good afterwards.

If it's a solid wall then providing you have decent fixings - we often use
shield anchor type bolts - into a solid surface then it is much easier to
install the bracket but you then have to chase in the cables which can be a
real pain. If the wall is soft or you hit mortar joints then you back into
difficulties again!

While you may be able to pick up some issues on a pre-install survey it is
only when you drill into the wall that you find out what you are up
against!

Neil B.

-----Original Message-----
From: ukha_d@xxxxxxx [mailto:ukha_d@xxxxxxx] On Behalf Of
White, Peter
Sent: Monday, April 18, 2005 12:46
To: ukha_d@xxxxxxx
Subject: [ukha_d] Installing plasma/lcd mounts


I've posted this on avforums, but thought there might be people on here
that
may have some views....

----------------------
My company has an opportunity to bid for installing plasma and LCD panels
for a major OEM. They're looking to offer 3 packages in the Home market.
The
first 2 are fine, just different amounts of gear connected together,
however
the 3rd option includes wall mounting the screen (and, in theory,
chasing/hiding the speaker wires). All the requirements so far have come
from the US, where (generally speaking) the construction of the houses are
more of a known quantity. However here in the UK and Europe the walls can
be
made of anything from wattle and daub through to stone.

My question is really aimed at the installers on this forum; bearing in
mind
the variations in wall types, how do you cope for every, or most,
eventualities? I suspect the answer would be to do a site survey in
advance,
and/or carry lots of tools and fixtures to cope with any situation. However
in this instance we're looking at high volume work, with lower margins than
are typically associated with AV installs, so would you have any
suggestions
on how best to deal with this? As we currently see it (bearing in mind we
HAVE to keep our costs relatively low), we have the following options:

- Run a pre-installation site visit for a nominal fee that would be
refundable if the install goes ahead
- Partner with a national installations or building/carpentry firm to
install the bracket, and let our engineers do the technical stuff
- Just ask the client what wall type they have. If they're wrong once we
turn up, then we reserve the option to walk away.

One of the many issues we have is that our engineers currently only carry
the tools needed to service a PC, and indeed, many of them will not have
the
skills required to install a plasma bracket. I guess that can be trained
into them, but really we're just looking for the easiest, least risk
solution.

Just looking for views and ideas really, any input welcome....
----------------------

Thanks all!


Pete



[Non-text portions of this message have been removed]







_____