The UK Home Automation Archive

Archive Home
Group Home
Search Archive


Advanced Search

The UKHA-ARCHIVE IS CEASING OPERATIONS 31 DEC 2024

Latest message you have seen: Projector cable advice


[Message Prev][Message Next][Thread Prev][Thread Next][Message Index][Thread Index]

IR Motion detection problem


  • Subject: IR Motion detection problem
  • From: "Harry Hendriks" <hja_hendriks@xxxxxxxxxxx>
  • Date: Wed, 03 Aug 2005 14:31:40 +0200



I have the following problem with the IR-motion detector in my garage: very
rare (may be once a month) it detects a very short movement during daylight
time, when there is definitely no movement (we have no pets, etc.).

This detector is also measured every night during two hours continuously
and
has shown no false indications at all during the two years of measurement.

The detector is positioned on a south wall and does not receive any direct
/
indirect sunlight. There are no moving curtains, etc.

I like to have a solution because my alarm trips also on this detector.
Please advise
Harry Hendriks





UKHA_D Main Index | UKHA_D Thread Index | UKHA_D Home | Archives Home

Comments to the Webmaster are always welcomed, please use this contact form . Note that as this site is a mailing list archive, the Webmaster has no control over the contents of the messages. Comments about message content should be directed to the relevant mailing list.