RE: [ADVERT] Very high intensity blue leds.

["SPEEDER ELECTRONICS" <speeder01@xxxxxxxxxxx>]

Paul,
=20
Depends on the quantity and complexity of course. The material costs are
likely to be fairly small even for stainless or brass.
Costs really amount to the time. CNC time is approx =A325ph and manual
=A318.=20
=20
BTW are you planning to drive the RGB leds with a PWM signal to allow
you to get 'any' colour?
=20
Andrew
=20
=20

Mr. Andrew Wade

Speeder Electronic Solutions Ltd.

Castor Industrial Estate

Castor Road

BRIXHAM

Devon

TQ5 9PY

01803-883833 Office phone & Fax.

01803-851682 Home
07971827026  Mobile


speeder01@xxxxxxx
andrew@xxxxxxx

-----Original Message-----
From: ukha_d@xxxxxxx [mailto:ukha_d@xxxxxxx] On Behalf
Of Paul Gale
Sent: 26 August 2005 21:08
To: ukha_d@xxxxxxx
Subject: RE: [ukha_d] [ADVERT] Very high intensity blue leds.


Great - I'll have a think this weekend. Trouble is, not sure how many
RGB LED's to put in each yet - I'm getting these from the US too.
They're meant to be better than the ones I had from RS which were
ABSOLUTE PANTS!!! ;)

What sort of costs could we be looking at (I know it's difficult to say
and very much depends on design etc) - just wanted to check it is
actually affordable ;)

Cheers,

Paul.



> -----Original Message-----
> From: ukha_d@xxxxxxx [mailto:ukha_d@xxxxxxx] On Behalf
Of
> SPEEDER ELECTRONICS
> Sent: 26 August 2005 18:11
> To: ukha_d@xxxxxxx
> Subject: RE: [ukha_d] [ADVERT] Very high intensity blue leds.
>=20
> Paul,
>=20
> I was going to make a stainless 'pepper pot' design.
>=20
> PCB mount the leds. On a circular PCB.
>=20
> Offer them up from underneath so the domes of the LEDs were proud of
the
> surface then fill with epoxy to seal and prevent movement.
>=20
> Finaly mill or turn off the front face to remove the domes of the leds
> leaving a flush sealed surface with a pepperpot design of 8, 9, 12
leds.
>=20
> Bit long winded but i wanted to go for something unusual.
>=20
> Limits of CNC lathe are final product has to be round or at least
axial.
> hexagon is ox rectangle is not.
>=20
> We can mill other shapes though.
>=20
> Send me a sketch and I will do a quick design for manufacture pass.
>=20
> Andrew
>=20
>=20
>=20
> Mr. Andrew Wade
>=20
> Speeder Electronic Solutions Ltd.
>=20
> Castor Industrial Estate
>=20
> Castor Road
>=20
> BRIXHAM
>=20
> Devon
>=20
> TQ5 9PY
>=20
> 01803-883833 Office phone & Fax.
>=20
> 01803-851682 Home
> 07971827026  Mobile
>=20
>=20
> speeder01@xxxxxxx
> andrew@xxxxxxx
>=20
> -----Original Message-----
> From: ukha_d@xxxxxxx [mailto:ukha_d@xxxxxxx] On Behalf
> Of Paul Gale
> Sent: 26 August 2005 17:22
> To: ukha_d@xxxxxxx
> Subject: RE: [ukha_d] [ADVERT] Very high intensity blue leds.
>=20
>=20
> Excellent - you're on - won't be for a while if that's OK though?
>=20
> I'm waiting on Gerry's RGB LED serial controller boards to come back
> from the US. The plan is to have 4 of these boards driving a max total
> of 52 RGB LED's. Don't know how many fixtures I'll need yet.
>=20
> What are the limitations of the CNC process you have? Is it easy to
> create parts for say, adjustable angled fixtures? Can you use any
metals
> e.g. stainless etc?
>=20
> When you were going to create these yourself, what type of lens/cover
> glass/plastic arrangement were you going to use?
>=20
> Thanks,
>=20
> Paul.
>=20
>=20
>=20
> > -----Original Message-----
> > From: ukha_d@xxxxxxx [mailto:ukha_d@xxxxxxx] On
Behalf
> Of
> > SPEEDER ELECTRONICS
> > Sent: 26 August 2005 14:16
> > To: ukha_d@xxxxxxx
> > Subject: RE: [ukha_d] [ADVERT] Very high intensity blue leds.
> >
> > Paul,
> >
> > We have an operator now. We can do custom bits. Our overheads are
> about
> > as low as you can get. Cow shed in Devon etc.
> > Send me a drawing / sketch / description.
> >
> > Andrew
> >
> >
> >
> > Mr. Andrew Wade
> >
> > Speeder Electronic Solutions Ltd.
> >
> > Castor Industrial Estate
> >
> > Castor Road
> >
> > BRIXHAM
> >
> > Devon
> >
> > TQ5 9PY
> >
> > 01803-883833 Office phone & Fax.
> >
> > 01803-851682 Home
> > 07971827026  Mobile
> >
> >
> > speeder01@xxxxxxx
> > andrew@xxxxxxx
> >
> > -----Original Message-----
> > From: ukha_d@xxxxxxx [mailto:ukha_d@xxxxxxx] On
Behalf
> > Of Paul Gale
> > Sent: 26 August 2005 13:39
> > To: ukha_d@xxxxxxx
> > Subject: RE: [ukha_d] [ADVERT] Very high intensity blue leds.
> >
> >
> > Hi Andrew,
> >
> > Are you still CNC operator-less?
> >
> > I might be looking for someone to make me some custom LED
enclosures
-
> > is this a VERY expensive process?
> >
> > Thanks,
> >
> > Paul.
> >
> >
> >
> > > -----Original Message-----
> > > From: ukha_d@xxxxxxx [mailto:ukha_d@xxxxxxx] On
> Behalf
> > Of
> > > SPEEDER ELECTRONICS
> > > Sent: 26 August 2005 11:25
> > > To: ukha_d@xxxxxxx
> > > Subject: [ukha_d] [ADVERT] Very high intensity blue leds.
> > >
> > > Some time ago I was planning to use up spare time on our CNC
to
make
> > > deck light fittings.
> > >
> > > But our CNC operator went of to pastures new.
> > >
> > > So I have '000s of 5mm very high intensity 8000mcd blue leds
> > >
> > > Bags of 250 @ =A325 inc postage (uk).
> > >
> > > As far as I can see Maplin still have them at =A30.80 each.
> > >
> > >
> > > Full spec available but v v v bright. My kids have them
festooned
> > around
> > > their rooms
> > >
> > >
> > >
> > > Mr. Andrew Wade
> > >
> > > Speeder Electronic Solutions Ltd.
> > >
> > > Castor Industrial Estate
> > >
> > > Castor Road
> > >
> > > BRIXHAM
> > >
> > > Devon
> > >
> > > TQ5 9PY
> > >
> > > 01803-883833 Office phone & Fax.
> > >
> > > 01803-851682 Home
> > > 07971827026  Mobile
> > >
> > >
> > > speeder01@xxxxxxx
> > > andrew@xxxxxxx
> > >
> > > -----Original Message-----
> > > From: ukha_d@xxxxxxx [mailto:ukha_d@xxxxxxx] On
> Behalf
> > > Of Andy Whitfield
> > > Sent: 26 August 2005 10:10
> > > To: ukha_d@xxxxxxx
> > > Subject: [ukha_d] Re: On Line Electronics Retailer
> > >
> > >
> > > --- In ukha_d@xxxxxxx, "Tracey Gardner"
> > > <tracey.gardner@t...> wrote:
> > > >
> > > > Can anyone recommend a net-based electronics retailer
in the UK?
> > > > An acquaintance of mine in Scandinavia is looking for
resistors,
> > > caps,
> > > > inductors, high-quality pots and selector switches.
> > > >
> > > > Would you believe that he tried Maplin, but found them
not very
> > > good! :-)
> > > >
> > > > Thanks
> > > > Tracey
> > >
> > > Cpc.co.uk are cheapest but rather limited choice. 
Farnell.com is
> > > the next choice.
> > > BTW if your acquaintance requires red LEDs or small signal
> > > transistors, I have thousands for sale!
> > > Regards
> > > Andy
> > >
> > >
> > >
> > >
> > >
> > >
> > >
> > >
> > >
> > >   _____
> > >
> > > YAHOO! GROUPS LINKS
> > >
> > >
> > >
> > > *      Visit your group "ukha_d
> <http://groups.yahoo.com/group/ukha_d>
> > > " on the web.
> > >
> > >
> > > *      To unsubscribe from this group, send an email to:
> > >  ukha_d-unsubscribe@xxxxxxx
> > > <mailto:ukha_d-unsubscribe@xxxxxxx?subject=3DUnsubscribe>
> > >
> > >
> > > *      Your use of Yahoo! Groups is subject to the Yahoo!
Terms of
> > > Service <http://docs.yahoo.com/info/terms/>
.
> > >
> > >
> > >   _____
> > >
> > >
> > >
> > >
> > > [Non-text portions of this message have been removed]
> > >
> > >
> > >
> > >
> > >
> > >
> > >
> > > Yahoo! Groups Links
> > >
> > >
> > >
> > >
> > >
> >
> >
> >
> >
> >
> >
> >
> >   _____
> >
> > YAHOO! GROUPS LINKS
> >
> >
> >
> > *      Visit your group "ukha_d
<http://groups.yahoo.com/group/ukha_d>
> > " on the web.
> >
> >
> > *      To unsubscribe from this group, send an email to:
> >  ukha_d-unsubscribe@xxxxxxx
> > <mailto:ukha_d-unsubscribe@xxxxxxx?subject=3DUnsubscribe>
> >
> >
> > *      Your use of Yahoo! Groups is subject to the Yahoo! Terms
of
> > Service <http://docs.yahoo.com/info/terms/>
.
> >
> >
> >   _____
> >
> >
> >
> >
> > [Non-text portions of this message have been removed]
> >
> >
> >
> >
> >
> >
> >
> > Yahoo! Groups Links
> >
> >
> >
> >
> >
> >
>=20
>=20
>=20
>=20
>=20
>=20
>=20
>=20
> SPONSORED LINKS
> Home
> <http://groups.yahoo.com/gads?t=3Dms
<http://groups.yahoo.com/gads?t=3Dms&k=3DHome+repair+improvement&w1=3DHome+=
rep
> &k=3DHome+repair+improvement&w1=3DHome+rep
>
air+improvement&w2=3DComputer+stuff&w3=3DHigh&w4=3DImprovement&c=3D4&s=3D76=
&.sig=3DT
> cERUCDPQcJLbg9mtvQGJQ> repair improvement       Computer
> <http://groups.yahoo.com/gads?t=3Dms
<http://groups.yahoo.com/gads?t=3Dms&k=3DComputer+stuff&w1=3DHome+repair+im=
pro
> &k=3DComputer+stuff&w1=3DHome+repair+impro
>
vement&w2=3DComputer+stuff&w3=3DHigh&w4=3DImprovement&c=3D4&s=3D76&.sig=3Dp=
lS9-eUUfa
> BXyLVFT87AJg> stuff       High
> <http://groups.yahoo.com/gads?t=3Dms
<http://groups.yahoo.com/gads?t=3Dms&k=3DHigh&w1=3DHome+repair+improvement&=
w2=3D
> &k=3DHigh&w1=3DHome+repair+improvement&w2=3D
>
Computer+stuff&w3=3DHigh&w4=3DImprovement&c=3D4&s=3D76&.sig=3Db5d547gPx7eFW=
NGqXQCl
> 7A>
> Improvement
> <http://groups.yahoo.com/gads?t=3Dms
<http://groups.yahoo.com/gads?t=3Dms&k=3DImprovement&w1=3DHome+repair+impro=
vem
> &k=3DImprovement&w1=3DHome+repair+improvem
>
ent&w2=3DComputer+stuff&w3=3DHigh&w4=3DImprovement&c=3D4&s=3D76&.sig=3DO6pw=
_oratTOwe
> p2G_91fIQ>
>=20
>   _____
>=20
> YAHOO! GROUPS LINKS
>=20
>=20
>=20
> *      Visit your group "ukha_d <http://groups.yahoo.com/group/ukha_d>
> " on the web.
>=20
>=20
> *      To unsubscribe from this group, send an email to:
>  ukha_d-unsubscribe@xxxxxxx
> <mailto:ukha_d-unsubscribe@xxxxxxx?subject=3DUnsubscribe>
>=20
>=20
> *      Your use of Yahoo! Groups is subject to the Yahoo! Terms of
> Service <http://docs.yahoo.com/info/terms/>
.
>=20
>=20
>   _____
>=20
>=20
>=20
>=20
> [Non-text portions of this message have been removed]
>=20
>=20
>=20
>=20
>=20
>=20
>=20
>=20
> Yahoo! Groups Links
>=20
>=20
>=20
>=20
>=20
>=20








SPONSORED LINKS=20
Home
<http://groups.yahoo.com/gads?t=3Dms&k=3DHome+repair+improvement&w1=3DHome+=
rep
air+improvement&w2=3DComputer+stuff&w3=3DHigh&w4=3DImprovement&c=3D4&s=3D76=
&.sig=3DT
cERUCDPQcJLbg9mtvQGJQ> repair improvement 	Computer
<http://groups.yahoo.com/gads?t=3Dms&k=3DComputer+stuff&w1=3DHome+repair+im=
pro
vement&w2=3DComputer+stuff&w3=3DHigh&w4=3DImprovement&c=3D4&s=3D76&.sig=3Dp=
lS9-eUUfa
BXyLVFT87AJg> stuff 	High
<http://groups.yahoo.com/gads?t=3Dms&k=3DHigh&w1=3DHome+repair+improvement&=
w2=3D
Computer+stuff&w3=3DHigh&w4=3DImprovement&c=3D4&s=3D76&.sig=3Db5d547gPx7eFW=
NGqXQCl
7A>=20=20=09
Improvement
<http://groups.yahoo.com/gads?t=3Dms&k=3DImprovement&w1=3DHome+repair+impro=
vem
ent&w2=3DComputer+stuff&w3=3DHigh&w4=3DImprovement&c=3D4&s=3D76&.sig=3DO6pw=
_oratTOwe
p2G_91fIQ>=20=20=09

_____=20=20

YAHOO! GROUPS LINKS=20


=09
*	 Visit your group "ukha_d <http://groups.yahoo.com/group/ukha_d>
" on the web.
=20=20

*	 To unsubscribe from this group, send an email to:
ukha_d-unsubscribe@xxxxxxx
<mailto:ukha_d-unsubscribe@xxxxxxx?subject=3DUnsubscribe>=20
=20=20

*	 Your use of Yahoo! Groups is subject to the Yahoo! Terms of
Service <http://docs.yahoo.com/info/terms/>
.=20


_____=20=20




[Non-text portions of this message have been removed]