[Message Prev][Message
Next][Thread Prev][Thread Next][Message
Index][Thread Index]
Re: Re: Clipsal questions - MSS100
> - Go into toolkit (1.1.5) and tell it to talk to an IP address
> rather than the COM port it uses at the moment.
No.........setup for a com port in my case com4.......
Frank
----- Original Message -----
From: <nick@xxxxxxx>
To: <ukha_d@xxxxxxx>
Sent: Tuesday, March 01, 2005 8:22 AM
Subject: [ukha_d] Re: Clipsal questions - MSS100
>
>
> > You will need the Lantronics
> > redirector software and also
> > ezwebcon ..from
> > the lantronics site...
> >
> > There might be other ways
> > to configure it
>
> My brain is going along the lines of:
>
> - Attach the MSS100 to my network;
> - Give it an IP address (manually or by DHCP);
> - Go into toolkit (1.1.5) and tell it to talk to an IP address
> rather than the COM port it uses at the moment.
>
> Am I being too simplistic, will that look too different from
> the "proper" Ethernet CBus device?
>
> Kwong, some technical thoughts needed!!
>
> Cheers,
>
> Nick
>
>
>
>
>
>
>
> Yahoo! Groups Links
>
>
>
>
>
>
>
UKHA_D Main Index |
UKHA_D Thread Index |
UKHA_D Home |
Archives Home
|