[Message Prev][Message
Next][Thread Prev][Thread Next][Message
Index][Thread Index]
Re: Re: Clipsal questions - MSS100
K. C. Li wrote:
>
> > In the rediredtor software i have ip addres 10.0.0.10 set up for
> > com4........then i open ezwebcon and search for new devices and
it
> should
> > bring up the mss unit and set it up for com4 9600 baud etc....
>
> Tne other important parameter apart from the IP address of the
> MSS100/5500PC combination is the port number. It should be set to 3000
(or
> 3001, can't remember exactly now).
3001 for noddy mode, or 2001 for raw mode (like wot I is using for the
console of my linux box so I get all the wizzy colour terminal features
and so on)...
All but one of mine are now configured and firmware upgraded, except one
which steadfastly refuses to show up in ezwebcon and when I connect to
it by ip address it can't work out what it is :-( Of course it had to be
the one I gave the *.*.*.13 address to!
Jim
UKHA_D Main Index |
UKHA_D Thread Index |
UKHA_D Home |
Archives Home
|