[Message Prev][Message
Next][Thread Prev][Thread Next][Message
Index][Thread Index]
X10 LD11 DIn rail dimmers..wiring advice needed
- Subject: X10 LD11 DIn rail dimmers..wiring advice needed
- From: "darren_karp2001" <darren@xxxxxxxxx>
- Date: Sat, 22 Jan 2005 17:33:06 -0000
Hi All,
I've mounted 5 LD11's on to a DIN rail enclosure (no bus bar just an
enclosure)and I'm a little confused about the wiring. The bottom of
the LM11 has ports for live & neutral and at the top a port for the
live feed to the lights themselves. What do I do with the neutral
wire from the light? Now, that's problem one, problem two is that I
need to feed this enclosure from my main consumer unit via a spare
MCB which is not currently used. Do I simply take a 2.5mm twin and
earth from this MCB to the first LD11's live and connect the neutral
to the neutral bar at the top of my enclosure and then loop the live
at the bottom of the LD11 to the next one and so on?
TIA
Darren
UKHA_D Main Index |
UKHA_D Thread Index |
UKHA_D Home |
Archives Home
|