Re: X10 LD11 DIn rail dimmers..wiring advice needed

["egelbeertje" <r_d_k@xxxxxxxxxxx>]

Hi Darren,

Problem 1) the live feed output on the top of the ld11 goes to the
lamp, you just have to split the neutral (which goes in at the bottom
of the unit and run it from the ld 11 input to the lamp.
Problem 2) basically you are right, you could say you are putting all
the inputs (both L & N) in parallel to each other by connecting them
like that.

rgds Rob.

--- In ukha_d@xxxxxxx, "darren_karp2001" <darren@a...>
wrote:
>
>
> Hi All,
>
> I've mounted 5 LD11's on to a DIN rail enclosure (no bus bar just
an
> enclosure)and I'm a little confused about the wiring. The bottom of
> the LM11 has ports for live & neutral and at the top a port for
the
> live feed to the lights themselves. What do I do with the neutral
> wire from the light? Now, that's problem one, problem two is that I
> need to feed this enclosure from my main consumer unit via a spare
> MCB which is not currently used. Do I simply take a 2.5mm twin and
> earth from this MCB to the first LD11's live and connect the
neutral
> to the neutral bar at the top of my enclosure and then loop the
live
> at the bottom of the LD11 to the next one and so on?
>
> TIA
> Darren