Dynalite

["Edward Pearson" <edward.mailgroup@xxxxxxxxxxxxxxxx>]

Has anybody on list used/installed a Dynalite system?

I was excited to be a winner in the UKHA2004 of a Dynalite dimmer pack and
am considering doing my house with it. It'd be a 24 channel system if I did
everything. Before I get too committed though I was wondering if anybody
has
had practical experience with it. I've searched the archives and seen some
discussion but no actual installations.

As a fully 'paid-up' member of the xAP group, I'd also write a xAP
interface
for the Dynalite bus (which is RS485 based) as part of my build to provide
the higher level automation.

So, before I commit myself, does anybody have any positive or negative
experiences - or am I to be the first...?

Edward

_____

From: John B [mailto:home-automation@xxxxxxx]
Sent: 07 March 2005 20:16
To: ukha_d@xxxxxxx
Subject: RE: [ukha_d] MS13E2 Unusual problem


Hi Richard,

> I had a MS13E working for over a year turning on a light when
> someone entered a room but about a month ago it stopped
> working. I have a Homevision where I can see received x10
> commands and when I press the House or Unit code button on
> the MS13 (which is set to C1) I don't get any command showing
> on the Homevision screen. However when I set the MS13 to
> House Code "A" the Homevision will see the commands. It
seems
> that the Homevision will only "see" commands from the MS13
> when it is set to House code "A" and any Unit code but any
> other Hose code does not work.

How are you picking up the RF signals? I'm guessing you have either a
TM12 or TM13 somewhere?
If so, it sounds like it's set to house code A rather than C.

Do you have any other RF devices using either house code A or C?

Regards,

John