RE: Crash course/info on X10 ?

["Dean Barrett" <dean@xxxxxxxxxxxxxxxxxxxxxxxx>]

Paul

See the phase coupler thankyou.

i assume there is a finite number of addresses available to set the units
to
- I assume 50 units is ok


Dean

_____

From: Paul Gale [mailto:groups@xxxxxxx]
Sent: 23 March 2005 16:14
To: ukha_d@xxxxxxx
Subject: RE: [ukha_d] Crash course/info on X10 ?


Seriously though Dean - X10 is pretty straight-forward. You will need to
check all the addresses if there isn't a list (best to be safe though). You
can also get couplers to transmit the X10 signals across phases:

http://www.letsautomate.com/10218.cfm?

If you're used to CBus, X10 is going to be a real disappointment! ;)

Oh, and yes you can put X10 devices anywhere you like pretty much. The only
problem is that they can be really susceptible to interference from noisy
devices (motors, TV's, fridges etc). I can't get any signals to one part of
my house!

Paul.



> -----Original Message-----
> From: Gareth Cook [mailto:g@xxxxxxx]
> Sent: 23 March 2005 15:59
> To: ukha_d@xxxxxxx
> Subject: Fw: [ukha_d] Crash course/info on X10 ?
>
>
> If he's using X10 PIR's then you'll have plenty of time to sneak in
and
> get out again :-)
>
> G.
>
>  Gareth Cook
>  SWG EMEA North Account Manager
>  IBM SWG - BTE Office - Lotus Park, Staines, TW18 3AG
>  Office: +44 (0)1784 445166 - Mobile: +44 (0)7980 445166
>  AIM Chat : TheBoyG - MSN Chat : chat@xxxxxxx
>  email: g@xxxxxxx
>
>
> ----- Forwarded by Gareth Cook/UK/IBM on 23/03/2005 15:58 -----
>
> Discussion
> Main Topic
>
> "Paul Gale" <groups@xxxxxxx>
> Today 15:25
>
> .
> Subject:
> .
> RE: [ukha_d] Crash course/info on X10 ?
> .
> Category:
>
>
>
>
> Just remind us of the address again Dean ;)
>
> ... now, where did I put that mask - could just use some stockings I
> guess!
>
> Paul.
>
>
>
> > -----Original Message-----
> > From: Dean Barrett [mailto:dean@xxxxxxx]
> > Sent: 23 March 2005 14:40
> > To: ukha_d@xxxxxxx
> > Subject: [ukha_d] Crash course/info on X10 ?
> >
> >
> > Having visited one of our major customers MD's properties i was
> confronted
> > with shed loads of X10 equipment.
> >
> > This is seriously big, very old house - 7 Bathrooms etc. etc.  He
wants
> > additional lighting circuits for lighting to be added to his 10
Acres of
> > Formal Gardens !!
> >
> > Therefore i need to very rapidly become an X10 expert :)
> >
> > I have a little time to learn as he is having half his garden
raised by
> > about 4 ft  -- so that should take a while :)
> >
> > Questions that immediately spring to mind.
> >
> > Can i mount AD10 or LD11s anywhere ? - Can we get the X10 signal
to
> cross
> > phases ? - he has a couple of 3phase supplies feeding the
> > house/pool/garage
> > etc.
> >
> > Where can i get details of setting up these new units - and if he
has
> > about
> > 20 of them already dotted around the house, do i need to see
every one
> to
> > make sure codes dont clash ?
> >
> > Any help or pointers appreciated.
> >
> > And for those car lovers amongst us - we had a look in his garage
- 8
> > bays,
> > tiled floor and parked in there were :-
> >
> > Porsche Cayanne
> > 3 Motor Bikes - no interest to me
> > 1 Bentley Convertible
> > 1 Bentley Hardtop
> > 1 Jaguar XK-R convertible
> > 1 Ferrari 355 Cabrio
> > 1  - wait for it Jaguar XJ220 is BRG - very nice indeed
> > and he wasnt there so dont know what he was driving :)
> >
> > I felt very lowly and insignificant as i left there in my
Chrysler PT
> > Cruiser.
> >
> > Any how - any suggestions appreciated
> >
> >
> >
> >
> > Dean.
> >
> >
> >
> >
> >
> >       Try our amazing lighting demonstration online now, and
watch in
> > realtime via our webcam. Click below and follow the CBus links.
> >       www.rolec.net
> >       dean@xxxxxxx
> >       Tel: 01908-210677
> >       Fax: 01908-210678
> >      The information in this internet E-mail is confidential and
is
> > intended
> > solely for the addressee. Access, copying or re-use of
information in it
> > by
> > anyone else is unauthorised. Any views or opinions presented are
solely
> > those of the author and do not necessarily represent those of The
Rolec
> > Group or any of its affiliates. If you are not the intended
recipient
> > please
> > contact wrongmail@xxxxxxx
> >
> >
> > [Non-text portions of this message have been removed]
> >
> >
> >
> >
> >
> > Yahoo! Groups Links
> >
> >
> >
> >
> >
> >
>
>
>
>
>
> Yahoo! Groups Links
>
>
>
>
>
>
>
>
>
> [Non-text portions of this message have been removed]
>
>
>
>
>
> Yahoo! Groups Links
>
>
>
>
>
>