[Message Prev][Message
Next][Thread Prev][Thread Next][Message
Index][Thread Index]
Fw: Fw: X10 REMOTE HELP
- Subject: Fw: Fw: X10 REMOTE HELP
- From: Gareth Cook <g@xxxxxxxxxx>
- Date: Tue, 4 Oct 2005 20:56:47 +0100
To change the Housecode, simply hold down the (top) ON button for 3
seconds. After the LED light flashes, press and release the (top) ON
button the appropriate number of times for the Housecode you want to set.
Once for A, twice for B, etc. The LED blinks for each press.
To change the unit code: Press and hold the (top) OFF button for 3
seconds. The red LED blinks back the current code. Press and release the
top OFF button the appropriate number of times for the Unit Code you want.
1 time for Unit Code 1, 2 times for 2, 16 times for 16. The bottom button
(lower) will automatically become 1 unit code higher than the top. (For
example, if the top button is A5, then the bottom button will be A6).
Gareth Cook
Tools and Process Architect
IBM SWG Sales - Lotus Park, Staines, TW18 3AG
Office: +44 (0)1784 445166 - Mobile: +44 (0)7980 445166
AIM Chat : TheBoyG - MSN Chat : chat@xxxxxxx
email: g@xxxxxxx
----- Forwarded by Gareth Cook/UK/IBM on 04/10/2005 20:56 -----
Discussion
Main Topic
ukha_d@xxxxxxx
Today 20:39
.
Subject:
.
[ukha_d] Fw: X10 REMOTE HELP
.
Category:
----- Original Message -----
From: "Frank Mc Alinden" <frankmc@xxxxxxx>
To: <ukha_d@xxxxxxx>
Sent: Tuesday, October 04, 2005 9:21 PM
Subject: X10 REMOTE HELP
> Hi All
> Could someone please tell me how to changes the device code on
this
> x10 remote
> http://tinyurl.com/92hxu
>
> Thanks
> Frank
>
> www.armaghelectrical.com.au
UKHA_D Main Index |
UKHA_D Thread Index |
UKHA_D Home |
Archives Home
|