RE: Re: [OT] Asterisk at home help + XAP integration

["christopher purves" <CHRIS_PURVES@xxxxxxx>]

You got homeseer (which supports XAP)  ?

If so get Kevins hardware XAP interface and you are off - you can control
the lot.

Failing that you could use cgate commands.

Chris


>From: "Dean Barrett" <dean@xxxxxxx>
>Reply-To: ukha_d@xxxxxxx
>To: <ukha_d@xxxxxxx>
>Subject: RE: [ukha_d] Re: [OT] Asterisk at home help + XAP integration
>Date: Thu, 20 Oct 2005 10:51:44 +0100
>
>I'm a Mainlobby user too - looks great, and does just about everything
I
>want.
>
>I'd really like some Cbus integration though.
>
>My current Cbus control via Mainlobby is an USB-UIRT pointing at a Neo
>switch behind my server :) - allows for 8 channels of IR control for
£75.00
>- cheapest method I can see at present....
>
>
>
>
>Dean.
>
>
>
>
>
>
>-----Original Message-----
>From: ukha_d@xxxxxxx [mailto:ukha_d@xxxxxxx] On Behalf Of
>christopher purves
>Sent: 20 October 2005 10:25
>To: ukha_d@xxxxxxx
>Subject: RE: [ukha_d] Re: [OT] Asterisk at home help + XAP integration
>
>Hi,
>
>On th e topic of mainlobby ..... check these out half way down !
>
>http://tinyurl.com/alzks
>
>or if you are loaded ..... you can do things like this with it
>
>http://www.htpcservers.com/phpbb/viewtopic.php?t=5275
>
>these are much more HA
>
>http://www.htpcservers.com/phpbb/viewtopic.php?t=5155
>
>
>Chris
>
>
>
>
> >From: "Dean Barrett" <dean@xxxxxxx>
> >Reply-To: ukha_d@xxxxxxx
> >To: <ukha_d@xxxxxxx>
> >Subject: RE: [ukha_d] Re: [OT] Asterisk at home help + XAP
integration
> >Date: Thu, 20 Oct 2005 10:13:25 +0100
> >
> >Frank
> >
> >Are you using the CharmedQuark, or tried it - i downloaded the
trial
> >and could see anything that looked like pretty screens :)
> >
> >I would certainly be interested as it seems to run of Viewsonic
> >Touchscreens, and works out cheaper the Homegate by a long way !!
> >
> >
> >
> >Dean.
> >
> >
> >   _____
> >
> >From: ukha_d@xxxxxxx [mailto:ukha_d@xxxxxxx] On Behalf
> >Of Frank Mc Alinden
> >Sent: 20 October 2005 10:07
> >To: ukha_d@xxxxxxx
> >Subject: Re: [ukha_d] Re: [OT] Asterisk at home help + XAP
integration
> >
> >
> >Hi Chris
> >
> >
> > >I presume they are going through CGATE ?
> >
> >Thats correct.........
> >
> > > will have a look although I
> > >must admit my preferred software for thte front end is
currently
> > >mainlobby - drop dead gorgeous front end and it speaks to my
Russound
> > >whole house audio system and has good integration with
homeseer which
> > >has good integration with XAP if you follow my drift.
> >
> >Sounds like your already sorted ;-))..........
> >
> >Frank
> >
> >
> >Original Message -----
> >From: "Chris Purves" <CHRIS_PURVES@xxxxxxx>
> >To: <ukha_d@xxxxxxx>
> >Sent: Wednesday, October 19, 2005 9:26 PM
> >Subject: [ukha_d] Re: [OT] Asterisk at home help + XAP integration
> >
> >
> >I presume they are going through CGATE ? I will have a look
although I
> >must admit my preferred software for thte front end is currently
> >Mainlobby - drop dead gorgeous front end and it speaks to my
Russound
> >whole house audio system and has good integration with homeseer
which
> >has good integration with XAP if you follow my drift.
> >
> >Chris
> >
> >
> >
> >
> >--- In ukha_d@xxxxxxx, "Frank Mc Alinden"
<frankmc@i...> wrote:
> > >
> > > Hi Chris
> > >
> > >             Might be an idea  to have a look at CQC
software....Some
> >nice
> > > Graphics ...They have a CBUS  Plugin and there was talk of
having a
> > > xAP plugin....
> > > http://www.charmedquark.com/
> > >
> > > Go into the Forum section and theres a CBUS thread with some
nice
> > > touchscreen pics ...
> > >
> > > HTH
> > > Frank
> > >
> > > ----- Original Message -----
> > > From: "Chris Purves" <CHRIS_PURVES@M...>
> > > To: <ukha_d@xxxxxxx>
> > > Sent: Wednesday, October 19, 2005 8:37 PM
> > > Subject: [ukha_d] Re: [OT] Asterisk at home help + XAP
integration
> > >
> > >
> > > Paul - any chance of a copy of your config files ? I have
not even
> > > gone near that aspect yet but have printed a ton of stuff
from the
> > > net that might help me. You're not using sipgate by any
chance are you
>?
> > >
> > > I always struggle to understand the difference between xap
and xpl.
> > > I have only used xap so far (with CBUS via the CBUS/XAP
gateway).
> > >
> > > I have 3 touchpanels around the house so I am keen to get
> > > integrating when support arrives.
> > >
> > > Ta
> > > Chris
> > >
> > > --- In ukha_d@xxxxxxx, "Paul Gale"
<groups@s...> wrote:
> > > >
> > > > xAP support for Asterisk is still being worked on but
I've not
> > > > heard
> > > anything for a couple of weeks. Should be good though - I've
asked
> > > for message waiting support which would allow good
integration into
> > > my HA network.
> > > >
> > > > I have the same config as you - Dell server, *@H,
SPA3000 - works
> > > really well.
> > > >
> > > > Paul.
> > > >
> > > > > -----Original Message-----
> > > > > From: ukha_d@xxxxxxx [mailto:ukha_d@xxxxxxx] On
> > > Behalf Of
> > > > > Ian Lowe
> > > > > Sent: 19 October 2005 11:01
> > > > > To: ukha_d@xxxxxxx
> > > > > Subject: RE: [ukha_d] [OT] Asterisk at home help +
XAP
> > > > > integration
> > > > >
> > > > > Asterisk at Home has xPL built in, not xAP.
> > > > >
> > > > > If you have xAP bits and bobs already, I think
there's a xAP
> > > module for
> > > > > Asterisk (not quite sure about the mechanics of
AAH vs Asterisk
> > > raw there)
> > > > > -
> > > > > I'm sure Patrick or Kevin mentioned that
previously?
> > > > >
> > > > > If you don't have an existing set of tools, have a
look at xPL.
> > > (there's a
> > > > > yahoo group over here: ukha_xpl@xxxxxxx )
> > > > >
> > > > > Ian.
> > > > >
> > > > > -----Original Message-----
> > > > > From: ukha_d@xxxxxxx [mailto:ukha_d@xxxxxxx] On
> > > Behalf Of
> > > > > christopher purves
> > > > > Sent: 19 October 2005 10:43
> > > > > To: ukha_d@xxxxxxx
> > > > > Subject: [ukha_d] [OT] Asterisk at home help + XAP
integration
> > > > >
> > > > > Hi All,
> > > > >
> > > > > Well I have finally installed *@home and as I know
quite a few
> > > > > of
> > > you use
> > > > > it
> > > > > I wanted comments on my master plan before I set
out to check
> >I'm not
> > > > > being
> > > > > an idiot.
> > > > >
> > > > > I have installed *@Home on a Dell £99 server (TM)
and that all
> > > seems fine
> > > > > -
> > > > > painless install.
> > > > >
> > > > > I propose the following - use Linksys PAB2
adapters on all fixed
> > > analogue
> > > > > phones in the house. Buy a sipura 3000 to connect
in the POTS
> > > > > land
> > > line
> > > > > and
> > > > > to plug an 'emergency' phone into - on a power
fail a relay in
> > > > > the
> > > sipura
> > > > > bridges the FXO and FXS ports so I can still use
the emergency
> > > phone no
> > > > > matter what.
> > > > >
> > > > > I have a couple of sipgate numbers now - I was
gonna use one for
> > > voice and
> > > > > one for fax and route appropriately.
> > > > >
> > > > > I think I simply need to enable XAP in the *
config to get XAP
> > > messages ?
> > > > >
> > > > > Does that make some kinda sense?
> > > > >
> > > > > Ta
> > > > > Chris
> > > > >
> > > > >
> > > > >
> > > > >
> > > > >
> > > > >
> > > > > Yahoo! Groups Links
> > > > >
> > > > >
> > > > >
> > > > >
> > > > >
> > > > >
> > > > >
> > > > >
> > > > >
> > > > >
> > > > >
> > > > >
> > > > >
> > > > >
> > > > > Yahoo! Groups Links
> > > > >
> > > > >
> > > > >
> > > > >
> > > > >
> > > > >
> > > > >
> > > >
> > >
> > >
> > >
> > >
> > >
> > >
> > >
> > >
> > > Yahoo! Groups Links
> > >
> >
> >
> >
> >
> >
> >
> >
> >
> >Yahoo! Groups Links
> >
> >
> >
> >
> >
> >
> >
> >
> >
> >
> >
> >
> >
> >
> >
> >SPONSORED LINKS
> >Home
> ><http://groups.yahoo.com/gads?t=ms&k=Home+repair+improvement&w1=Home+re
> >pair+
>
>improvement&w2=Computer+stuff&w3=High&w4=Improvement&c=4&s=76&.sig=TcER
> >UCDPQ
> >cJLbg9mtvQGJQ> repair improvement 	Computer
> ><http://groups.yahoo.com/gads?t=ms&k=Computer+stuff&w1=Home+repair+impr
> >oveme
>
>nt&w2=Computer+stuff&w3=High&w4=Improvement&c=4&s=76&.sig=plS9-eUUfaBXy
> >LVFT8
> >7AJg> stuff 	High
> ><http://groups.yahoo.com/gads?t=ms&k=High&w1=Home+repair+improvement&w2
> >=Comp
>
>uter+stuff&w3=High&w4=Improvement&c=4&s=76&.sig=b5d547gPx7eFWNGqXQCl7A>
> >
> >Improvement
> ><http://groups.yahoo.com/gads?t=ms&k=Improvement&w1=Home+repair+improve
> >ment&
>
>w2=Computer+stuff&w3=High&w4=Improvement&c=4&s=76&.sig=O6pw_oratTOwep2G
> >_91fI
> >Q>
> >
> >   _____
> >
> >YAHOO! GROUPS LINKS
> >
> >
> >
> >*	 Visit your group "ukha_d <http://groups.yahoo.com/group/ukha_d>
"
> >on the web.
> >
> >
> >*	 To unsubscribe from this group, send an email to:
> >  ukha_d-unsubscribe@xxxxxxx
> ><mailto:ukha_d-unsubscribe@xxxxxxx?subject=Unsubscribe>
> >
> >
> >*	 Your use of Yahoo! Groups is subject to the Yahoo! Terms of
Service
> ><http://docs.yahoo.com/info/terms/>
.
> >
> >
> >   _____
> >
> >
> >
> >
> >[Non-text portions of this message have been removed]
> >
> >
> >
> >
> >
> >Yahoo! Groups Links
> >
> >
> >
> >
> >
> >
> >
> >
>
>
>
>
>
>
>Yahoo! Groups Links
>
>
>
>
>
>
>
>
>
>Yahoo! Groups Links
>
>
>
>
>
>
>
>