Re: Where to purchase DS1820's (1 wire thermometers)

["Frank Mc Alinden" <frankmc@xxxxxxxxxxxxxxxx>]

Hi Craig
I intially used the TOM10 Board which you can connect up to 10
dallas temp sensors and it has a serial interface.....There  is an xPL
Plugin for it so i was able to get the sensors to control my bedroom sweep
fans....had the sensors mounted in a small box via cat5.......

I now use my Probe  system as i can now connect Dallas temp sensors
(ds18s20) to it.....this saves me a cat5 cable to each room and my probe
system also has an xPL Plugin....
http://www.armaghelectrical.com.au/page9.html

Another list member has installed the dallas sensors inside used bullet
shells and this is what i intend to do as well........

HTH
Frank


----- Original Message -----
From: "Craig" <lists@xxxxxxx>
To: <ukha_d@xxxxxxx>
Sent: Saturday, October 29, 2005 7:24 PM
Subject: RE: [ukha_d] Where to purchase DS1820's (1 wire thermometers)


>> Just an update to say that the DS1820's arrived in this
>> mornings post, great service...
>
> How are list members using the DS1820's, what interface and software
are
> you using, how are you mounting them?
>
>
>
>
> Yahoo! Groups Links
>
>
>
>
>
>