RE: BT to RJ45 convertors

["Paul Gale" <groups@xxxxxxxxxxxxxxxx>]

Ah yes - good idea. Did you wire to the standards or just use any old
pair?

Cheers,

Paul.



-----Original Message-----
From: ukha_d@xxxxxxx [mailto:ukha_d@xxxxxxx] On Behalf Of Paul
Gordon
Sent: 24 April 2006 11:42
To: UKHA_D Group
Subject: RE: [ukha_d] BT to RJ45 convertors

Paul, as you're obviously already comfortable with DIY solutions, do
what I did, and make your own adapters. Just go to any nearby
"Poundland" or similar and buy some bog standard telephone
extension
cables (for a pound!) cut 8 inches or so off each end, and crimp an RJ45
onto the bared ends. From each extension cable you then get 1 x RJ45 to
BT PLUG and 1 x RJ45 to BT SOCKET pair - you may not need the former,
depending on how you connect the BT line to the patch panel in Node 0...
- orginally I used the first DIY cable to make a single port patch from
a standard BT wall outlet into a "normal" port on my panel, but
more
recently I dedicated a block of ports on my panel to phones and punched
the BT cable across a commonned block of 6 ports on my patchpanel, so
now I just use standard RJ45-RJ45 patchcords instead.

http://paulgordon.homeip.net/nodezero.html

Paul G.



> -----Original Message-----
> From: ukha_d@xxxxxxx [mailto:ukha_d@xxxxxxx]
> On Behalf Of Paul Gale
> Sent: 24 April 2006 11:16
> To: UKHA_D Group
> Subject: [ukha_d] BT to RJ45 convertors
>
> Where's the cheapest place to get BT to RJ45 convertors to
> run tel through a patch panel?
>
> I already have this working for a couple of years and cut the
> original BT plugs off a couple of DECT phones - but now want
> to add more and I don't want to have to fiddle around so much.
>
> Cheers,
>
> Paul.
>
>
>
>
>
> [Non-text portions of this message have been removed]
>
>
>
>
> Yahoo! Groups Links
>
>
>
>
>
>
>