[Message Prev][Message
Next][Thread Prev][Thread Next][Message
Index][Thread Index]
RE: C-Bus / Cat5e
- Subject: RE: C-Bus / Cat5e
- From: "Phil Harris" <phil@xxxxxxxxxxx>
- Date: Sun, 30 Apr 2006 00:16:16 +0100
> Yep ... I was only wondering why the pink / mains rating
> should more than double the price ! ?
Mainly because basic CAT5e is produced in phenominally large quantities
compared to the somewhat specialist requirement for the C-Bus CAT5e cable
... economies of scale and all that. If the CAT5e spec encompassed the
needs
of the C-Bus cabling then that level of spec would be produced in much
larger quantities and would probably be a fair bit cheaper...
> btw, this site offers quite a few choices -
>
> http://www.minitran.co.uk/pages/products/list.mhtml?ct=1&sc=1
>
> with some very good brands (Belden, Nexans, etc) + some
> unbranded, with an enormous price range for a variety of Cat 5e cables
>
> which would people choose, for HA - unbranded at 30+VAT, Belden at
> 35+VAT or Belden at 70+VAT ???
The simple answer is you choose the cable that is appropriate for the
job...
...if you are pulling runs that are never going to move then use solid
core,
if you need to run externally then use a cable with an exterior grade
sheath, if you are making flexible patch leads then use stranded cable, is
LSOH sheathing important?
Pick a cable that fits the job in hand...
> (not wishing to be too pedantic, I've rounded the numbers !)
OK - I'll stop working out VAT correctly then...
Phil
UKHA_D Main Index |
UKHA_D Thread Index |
UKHA_D Home |
Archives Home
|