Fw: Require cheap audio cat5 balun

[Gareth Cook <g@xxxxxxxxxx>]

Havn't got this 2nd sub yet - nor do I have a TX I can use to send the
signal in the first place chap

G.

Gareth Cook
IT Architect / Project Manager, SWG Sales
IBM SWG Sales - Lotus Park, Staines, TW18 3AG
Office: +44 (0)1784 445166 - Mobile: +44 (0)7980 445166
email: g@xxxxxxx


----- Forwarded by Gareth Cook/UK/IBM on 07/08/2006 15:41 -----

Discussion
Main Topic

ukha_d@xxxxxxx
Today 14:52

.
Subject:
.
RE: [ukha_d] Require cheap audio cat5 balun
.
Category:



Hi Gareth

> I'm after a single channel balun for audio. Basically, to send the
> subwoofer signal from the remote amp.
>
> Any recommends ? I use KAT5 extensively and have some spare KAT5
> tx's, but
> no spare rx's - and thats an expensive route to take just for this.
>

Does your sub have a BALANCED XLR LINE INPUT as well as unbalanced Phono?

If it does then you can use one of your KAT5 Transmitters and connect it
directly to the XLR input of the Sub.

If you use the Left Audio channel it is the BLUE pair.

If you use the Right Audio channel it is the GREEN pair.

XLR Connections

1. Ground - Not used
2. Hot (+ve) - Colour (BLUE/White or GREEN/White)
3. Cold (-ve) - White (WHITE/Blue or WHITE/Green)

Hope that helps

Keith