Re: Display enclosure and line receivers

["Frank Mc Alinden" <frankmc@xxxxxxxxxxxxxxxx>]

Hi Simon

Have a look at Steve Coopers  VFD Box
http://www.gadgetshed.co.uk/gallery/vfd

> I am also after a SN75189 line driver from Texas Instruments of MC1489
> from Motorola semi to use with the display.

I have quite a few of these.....If you cant source from someone in the UK
.... i can send some over when i sent some kit to a UK member in the next
week or so.....and hopefully he can pass them on...

HTH
Frank


----- Original Message -----
From: "Simon Ryley" <simon.ryley@xxxxxxx>
To: <ukha_d@xxxxxxx>
Sent: Wednesday, August 09, 2006 7:26 PM
Subject: [ukha_d] Display enclosure and line receivers


> Hello all,
>
> I'm just finishing off a VFD display for my lounge to show caller id
> info at a size I can read from across the room.  I really need a
decent
> enclosure to mount it in, and would appreciate any advice from list
> members as to where I can obtain one.  The display dimensions are 220
mm
> long, 60 mm high and 17 mm deep.  The enclosure needs to be of
suitable
> size to mount the display and have a clear or smoked front panel so
the
> vfd can be seen.  I've seen this one at Farnell, but I am sure there
> must be something better... http://tinyurl.com/ha3al
>
> I am also after a SN75189 line driver from Texas Instruments of MC1489
> from Motorola semi to use with the display.  They seem to be a bit
> tricky to obtain, so does anyone have such a device that they would
> happily swap for beer tokens?
>
> Thanks in advance,
>
> Simon
>
>
>
> Yahoo! Groups Links
>
>
>
>
>
>