> X10 and Cbus don't mix at all if there is close proximity
> between the two systems (certainly with the dimmers). I've
> got Cbus and X10 in the same consumer unit and the X10
> doesn't work at all anymore.
I guess there may be some mains noise generated by all the switching going
on in the dimmers so you'll probably find that an FD10 in the mains supply
to the C-Bus modules would cure that...
Phil
Comments to the Webmaster are always welcomed, please use
this contact form
. Note that as this site is a mailing list archive, the Webmaster has no control
over the contents of the messages. Comments about message content should be directed
to the relevant mailing list.