[Message Prev][Message
Next][Thread Prev][Thread Next][Message
Index][Thread Index]
Re: Integrating BT Home Monitor VP1000/Visonic to Homeseer
One for Craig - does the Powermax alarm console transmit any codes, or
is it only the sensors?
Mal
Mark McCall wrote:
> Submission by Craig
>
> This article discusses the RFXCOM Visonic receiver available from
> www.rfxcom.com, and how it can easily be used to integrate a Visonic
or BT
> VP1000 Home Monitor Alarm system with Homeseer. The VP1000 alarm from
> BT has
> been monitoring my home for sometime. Before purchasing the Alarm I
was
> sceptical about the range and reliability of the wireless protocol. I
> found
> a good deal on the internet that included extra keyfobs and PIRs, and
> thought I would take a risk and give it try. Once the Alarm was
> installed, I
> was surprised at the reliability and range of the security devices,
the
> range of the Visonic PIRs is actually better than the existing WiFi
> installation...
>
> http://www.automatedhome.co.uk/article1747.html
> <http://www.automatedhome.co.uk/article1747.html>
>
> M.
>
>
UKHA_D Main Index |
UKHA_D Thread Index |
UKHA_D Home |
Archives Home
|