[Message Prev][Message
Next][Thread Prev][Thread Next][Message
Index][Thread Index]
Clipsal 2 gang faceplate - more than 6 switches ?
- Subject: Clipsal 2 gang faceplate - more than 6 switches
?
- From: "kw1816" <kw1816@xxxxxxxxxxx>
- Date: Tue, 29 Aug 2006 13:00:13 -0000
I was having a think about changing the light switches in the living
room for something more compact. At the moment I have one 2 gang, 4
switch M&K grid linked to X10 dimmers (the little back box thingys)
and a sperate set of 1 gang 4 switch Clipsal that,through a Heath
robinson type affair, sends X-10 commands for Homeseer to activate
lighting scenes.
I'd like to bring all the switches onto a single 2 gang Clipsal
faceplate but I can't seem to find a faceplate that will take more
than 6 switches ? I need 8 :-)
Do Clipsal do an 8 switch faceplate or do I have to think again ? And
before anyone says C-Bus, this years HA budget has been decimated by
building an extension. Although I did talk the wife into a whole house
heat recovery ventilation system that looks like it may have HA
possibilities ....
Ta
Kevin W.
UKHA_D Main Index |
UKHA_D Thread Index |
UKHA_D Home |
Archives Home
|