[Message Prev][Message
Next][Thread Prev][Thread Next][Message
Index][Thread Index]
RE: Clipsal 2 gang faceplate - more than 6 switches ?
- Subject: RE: Clipsal 2 gang faceplate - more than 6 switches
?
- From: "ben addison" <ben@xxxxxxxxxxxxxx>
- Date: Tue, 29 Aug 2006 18:47:50 +0100
Kevin,
The neo or DLT are 8 gang.
The neo fits on a standard 1gang box, but the DLT needs a 1 gang J box.
Ben Addison
Ben Addison Ltd (electrical Contractors)
07889845712
www.benaddison.com
_____
From: ukha_d@xxxxxxx [mailto:ukha_d@xxxxxxx] On Behalf Of
kw1816
Sent: 29 August 2006 14:00
To: ukha_d@xxxxxxx
Subject: [ukha_d] Clipsal 2 gang faceplate - more than 6 switches ?
I was having a think about changing the light switches in the living
room for something more compact. At the moment I have one 2 gang, 4
switch M&K grid linked to X10 dimmers (the little back box thingys)
and a sperate set of 1 gang 4 switch Clipsal that,through a Heath
robinson type affair, sends X-10 commands for Homeseer to activate
lighting scenes.
I'd like to bring all the switches onto a single 2 gang Clipsal
faceplate but I can't seem to find a faceplate that will take more
than 6 switches ? I need 8 :-)
Do Clipsal do an 8 switch faceplate or do I have to think again ? And
before anyone says C-Bus, this years HA budget has been decimated by
building an extension. Although I did talk the wife into a whole house
heat recovery ventilation system that looks like it may have HA
possibilities ....
Ta
Kevin W.
[Non-text portions of this message have been removed]
UKHA_D Main Index |
UKHA_D Thread Index |
UKHA_D Home |
Archives Home
|