RE: Problem with Webguide 4 + NAT

["David Irwin \(Home\)" <david@xxxxxxxxxxxxxxxx>]

Darren,
I assume you are testing this access from outside your home network when
you
say it will not work?
It is normal for many routers (and I have no knowledge of the speedtouch
you
have specifically) is that the router cannot cope with the traffic coming
from inside your network and trying to re-route it back into your network.
Hope that helps

Also I assume you are trying to access using one of the following:
http://DYNDNSADD.com:1200/ or http://127.0.0.1:1200/
(inserting the correct
DNS or IP address)? Sometimes missing the http: bit causes problems.

Dave

-----Original Message-----
From: ukha_d@xxxxxxx [mailto:ukha_d@xxxxxxx] On Behalf Of
darren_karp2001
Sent: 10 December 2006 20:34
To: ukha_d@xxxxxxx
Subject: [ukha_d] Problem with Webguide 4 + NAT

Hi all,

Having forwarded ports 1200 & 1201 to my MCE 2005 PC on my Speedtouch
716WLV5 router and subscribed to the free Dyndns service (which pings
fine) I can't see the WG interface on my browser when using either my
dyndns or IP addy.

When I reconfigure my router to NOT use NAT it seems okay but none of
the PC's connect to the internet (no idea why!).

Does anyone have any ideas as to what I need to do?

TIA
Darren



** Sponsored by http://www.BERBLE.com **
all the Cool Stuff, in one Place








** Sponsored by http://www.BERBLE.com **
all the Cool Stuff, in one Place