The UK Home Automation Archive

Archive Home
Group Home
Search Archive


Advanced Search

The UKHA-ARCHIVE IS CEASING OPERATIONS 31 DEC 2024


[Message Prev][Message Next][Thread Prev][Thread Next][Message Index][Thread Index]

Re: Problem with Webguide 4 + NAT


  • Subject: Re: Problem with Webguide 4 + NAT
  • From: "Slavo" <slavo@xxxxxxxxxxx>
  • Date: Mon, 11 Dec 2006 09:07:54 -0000

Darren,

I happen to have the same router so I might be able to help. The best
way to find out if you get the hit from WAN side is to set up logging
on the firewall rule which allows the forwarding and check the logs.
You need to download the CLI reference from http://speedtouch.co.uk ,
http://speedtouch.nl or
other place. You must have the firewall rule
to allow "forward" (not sink or source) to the IP you need.

Slavo




** Sponsored by http://www.BERBLE.com **
all the Cool Stuff, in one Place



UKHA_D Main Index | UKHA_D Thread Index | UKHA_D Home | Archives Home

Comments to the Webmaster are always welcomed, please use this contact form . Note that as this site is a mailing list archive, the Webmaster has no control over the contents of the messages. Comments about message content should be directed to the relevant mailing list.