[Message Prev][Message
Next][Thread Prev][Thread Next][Message
Index][Thread Index]
Re: Component to Composite Converter
- Subject: Re: Component to Composite Converter
- From: "darren_karp2001" <darren.karp@xxxxxxxxx>
- Date: Thu, 21 Dec 2006 13:48:32 -0000
Would this do?
KEENE PHONO 1:5 AV DISTRIBUTION AMPLIFIER
The KPDA is a high quality audio/video distribution amplifier,
allowing one video and audio source to simultaneously supply up to
five other devices. It uses very high quality high bandwidth ICs to
ensure that each output is indiscernible from the input, making it
ideally suited to driving multiple displays or making multiple
copies from one source. There are two stereo audio channels and four
video channels, making it suitable for use with component video,
RGsB video, RGBs video or 4 x composite video plus audio. Any of the
video channels can also be used for digital audio if desired.
Supports all HDVT formats up to 1080p
Can be used for component or RGsB plus digital audio
Technical Specification
Power requirements: by external supply to DC input socket, (2.1mm
centre positive) 12-18v DC @ 300mA or greater.
Video: 5 buffered video outputs
- Bandwidth 70MHz
- Level - Composite / Luminance 1v pp, Chrominance 0.3v peak to peak.
- Distortion components < -50db up to 10Mhz
- Open circuit voltage gain is X2 (unity gain when correctly
terminated)
- Back terminated series 75R outputs for reflection free performance
- DC coupled on all outputs
- Slew rate up to 500v/uS
Audio: 5 buffered audio outputs
- Distortion <0.1%
- Bandwidth 20Hz 30KHz
- Output impedance, <1K ohms each output
- Input impedance >10K ohms
- Unity gain
Dimensions: 220mm x 104mm x 43mm
Weight: 780g (exc supply)
[KPDA] ? 99.99 (? 85.10 ex VAT)
UKHA_D Main Index |
UKHA_D Thread Index |
UKHA_D Home |
Archives Home
|