The UK Home Automation Archive

Archive Home
Group Home
Search Archive


Advanced Search

The UKHA-ARCHIVE IS CEASING OPERATIONS 31 DEC 2024


[Message Prev][Message Next][Thread Prev][Thread Next][Message Index][Thread Index]

RE: Re: Sky Digital + Loftbox


  • Subject: RE: Re: Sky Digital + Loftbox
  • From: "Dean Smith" <dean@xxxxxxxxxxxxxxx>
  • Date: Tue, 10 Jan 2006 17:08:32 -0000

Sounds absolutely identical - In the early days I did check the signal
strength when we were missing channels and it was good. Its only more
recently the signal strength has been showing zero.

It's also still happened with the loftbox bypassed albeit less often I
think, so I think I've eliminated that as a cause.

I have another old dish and LNB that I know works. I may set that up and
see
if it cures it. Should tell me if its LNB or Knackered digibox at least.
-----Original Message-----
From: ukha_d@xxxxxxx [mailto:ukha_d@xxxxxxx]On Behalf Of
dermot_bradley
Sent: 10 January 2006 16:50
To: ukha_d@xxxxxxx
Subject: [ukha_d] Re: Sky Digital + Loftbox


--- In ukha_d@xxxxxxx, "Dean Smith" <dean@e...> wrote:
>
> Over the last few weeks we've been losing our sky signal on various
> channels, so we get the "no satellite signal being recieved"
message
> but it comes and goes. Sometimes all the channels are fine,
> sometimes we're losing virtually everything. Looking on the signal
> strength page, When the signal's there its fine i.e. about 75%, or
> there's nothing and we dont even get the "locked" message.
It
> doesn't vary in strength, its all or nothing. It's been
> getting steadily worse to the point where we could only get BBC1/2
> (and Paramount1!) No ITV, CH4 or Sky1 etc.

I've experienced something similiar off and on the past month or so -
I lose some channels (on same Mux) and others are fine or I lose
most/all channels. I don't have a cable amp, the box is just wired
straight to the LNB, I'm assuming the LNB's getting water in (though
its happened on dry days) or else the cold is affecting it.

The thing is when I lose some channels completely if I check the
signal strength it shows up still as 60-70% even with the problem...











SPONSORED LINKS Home repair improvement  Computer stuff  High
Improvement


----------------------------------------------------------------------------
--
YAHOO! GROUPS LINKS

a..  Visit your group "ukha_d" on the web.

b..  To unsubscribe from this group, send an email to:
ukha_d-unsubscribe@xxxxxxx

c..  Your use of Yahoo! Groups is subject to the Yahoo! Terms of
Service.


----------------------------------------------------------------------------
--



[Non-text portions of this message have been removed]




UKHA_D Main Index | UKHA_D Thread Index | UKHA_D Home | Archives Home

Comments to the Webmaster are always welcomed, please use this contact form . Note that as this site is a mailing list archive, the Webmaster has no control over the contents of the messages. Comments about message content should be directed to the relevant mailing list.