The UK Home Automation Archive

Archive Home
Group Home
Search Archive


Advanced Search

The UKHA-ARCHIVE IS CEASING OPERATIONS 31 DEC 2024


[Message Prev][Message Next][Thread Prev][Thread Next][Message Index][Thread Index]

Re: Re: Conservatory planning



What do you mean by permanent heating in a conservatory requiring approval?
My understanding that you can put any heating you like in a
conservatory as long as it has seperate control from the main house
heating?

On 11/01/06, David Chapman <david@xxxxxxx> wrote:
> > square metre is the give away - those around 75w/sq metre are
really for
> > comfort use. 120w/sq.m upwards and you are getting upto the
levels needed
> > for room heating.
>
> Not the case for a new house - or an old house with good insulation.
I'm
> just finishing a renovation and it's been insulated well but
construction is
> bog standard 75mm cavity brick and block walls (although have had
insulation
> pumped in).
>
> The water based underfloor heating system is designed around an output
of
> 75w/sq.m (pipes under chipboard - not screed) and that is proving more
than
> adequate to keep us warm.  (20+ inside, freezing outside)
>
> By the way - if you put any form of permanent heating in a
conservatory it
> will need building regs approval - if it's not heated and seperated
from the
> house by a door then normally it doesn't need approval but check all
this
> carefully -  definitely don't "wing" it or it will likely
come back and bite
> yer bum when you sell !!
>
> David C
>
>
>
>
> Yahoo! Groups Links
>
>
>
>
>
>
>





UKHA_D Main Index | UKHA_D Thread Index | UKHA_D Home | Archives Home

Comments to the Webmaster are always welcomed, please use this contact form . Note that as this site is a mailing list archive, the Webmaster has no control over the contents of the messages. Comments about message content should be directed to the relevant mailing list.