The UK Home Automation Archive

Archive Home
Group Home
Search Archive


Advanced Search

The UKHA-ARCHIVE IS CEASING OPERATIONS 31 DEC 2024


[Message Prev][Message Next][Thread Prev][Thread Next][Message Index][Thread Index]

RE: Electrisave Monitoring Device - A small review


  • Subject: RE: Electrisave Monitoring Device - A small review
  • From: "Iain Goodhew" <I.C.B.Goodhew@xxxxxxxxx>
  • Date: Fri, 13 Jan 2006 15:41:08 -0000


I too decided to buy one, due to the =A320 discount. When it arrives I
will=
hook it up to the test equipment here at uni and have a look at the possib=
ility of getting the data to the PC. It should be possible to either take
t=
he data from their receiver unit, or add a second 433MHz receiver to a pc
i=
nterface. Depend on how much people want to spend.

Iain


> -----Original Message-----
> From: ukha_d@xxxxxxx [mailto:ukha_d@xxxxxxx] On Behalf Of
> darren_karp2001
> Sent: 13 January 2006 11:34
> To: ukha_d@xxxxxxx
> Subject: [ukha_d] Electrisave Monitoring Device - A small review
>=20
> Hi All,
>=20
> As mentioned on another thread I received my electrisave 'cent-a-
> meter' this morning.
>=20
> Well packed and complete, installation was a doddle. As I have an
> outdoor plastic cavity box I decided to attach the sensor to the
> live wire feeding my meter and attached the transmitter to the back
> of the box using some double sided sticky foam.
>=20
> After pressing 'search' on the back of the receiver it started
> monitoring straight away.
>=20
> Configuring the device from $ to =A3 and entering my unit cost per Kwh
> (6.6p) was a doddle and the instruction manual accompanying the
> device made it easy to understand.
>=20
> The LCD which isn't backlit is nice and large (circa 4.5" square)
> and the readout is very clear. It benefits from displaying the
> average humidity and temperature every 3 seconds which is an added
> benefit. A face icon displays whether it believes the humidity is
> good or bad.
>=20
> You can set the device to display pence per hour, KwH or Amps being
> drawn.
>=20
> The MAJOR downside to this unit is that is DOES NOT keep a tally of
> your consumption, so although you can take the receiver to various
> appliances around the home to see what they cost per hour to run, it
> won't let you see 'savings' made on a week by week or month by month
> basis.
>=20
> This IMHO lets the unit down dramatically. Afterall, how can
> you 'save' money if you don't know how much you are 'saving'?
>=20
> There is however, a Mark II version of the unit being launched in
> the 2nd half of 2007 which is meant to have features like the
> ability to link it to a PC, etc.
>=20
> The transmitter frequency is 433Mhz so it would be interesting to
> see if any kind technical chap can come up with a solution to allow
> PC monitoring and recording.
>=20
> All in all a very clever device and well made but in its current
> form it makes for an expensive temperature & humidity gauge.
>=20
> Darren
>=20
>=20
>=20
>=20
>=20
>=20
>=20
>=20
> Yahoo! Groups Links
>=20
>=20
>=20
>=20
>=20






________________________________________
YAHOO! GROUPS LINKS=20

* =A0Visit your group "ukha_d" on the web.
=A0=20
* =A0To unsubscribe from this group, send an email to:
=A0ukha_d-unsubscribe@xxxxxxx
=A0=20
* =A0Your use of Yahoo! Groups is subject to the Yahoo! Terms of
Service.=20

________________________________________




UKHA_D Main Index | UKHA_D Thread Index | UKHA_D Home | Archives Home

Comments to the Webmaster are always welcomed, please use this contact form . Note that as this site is a mailing list archive, the Webmaster has no control over the contents of the messages. Comments about message content should be directed to the relevant mailing list.