The UK Home Automation Archive

Archive Home
Group Home
Search Archive


Advanced Search

The UKHA-ARCHIVE IS CEASING OPERATIONS 31 DEC 2024


[Message Prev][Message Next][Thread Prev][Thread Next][Message Index][Thread Index]

Re: Cat 5e Cable running tips needed!



Have you tried taping one of your CCTV cameras to the end of a rod and
pushing it under the floor floor a look see? Or pop a still camera down as
far as you can reach and take a bunch of flash pictures. I must admit
they're sometimes difficult to interpret, but I quite often get useful
information that way.

Pete



*********** REPLY SEPARATOR  ***********

On 13/01/2006 at 17:24 darren_karp2001 wrote:

>Hi All,
>
>I intend to install my home CCTV system over the next couple of days
>and need some cabling running tips.
>
>All 4 cameras will be mounted outside and I need to fathom a way of
>getting Cat 5e cable from the cupboard under the stairs to each of the
>two locations outside.
>
>Normally this wouldn't be too much trouble as I have electricians rods
>but the cable runs need to go from an airbrick outside the kitchen
>back door to the cupboard and the kitchen floor is tiles on top of
>concrete! The concrete isn't too thick and somehow rests on top of
>joists (I can see these joists when I shine a torch from under the
>loose floorboards in the cupboard). The issue is that something is
>blocking the straight path and I am short by around 1.5 metres. I'm
>not certain if its a sleeper wall or what as I'm unable to see far
>enough.
>
>The alternative is to take the cables from the cupboard, through the
>downstairs loo and outside by drilling a hole through the toilet room
>tiles next to the overflow pipe but I really don't like the sound of
>this as the wife will probably go crazy, it will look messy, and I'll
>probably end up ruining some tiles.
>
>I have looked behind the skirting in the kitchen to see if the
>previous owners had a 'route' into the kitchen for pipes and cables
>but they are clearly going under the floor / routed into the concrete.
>
>Does anyone have any tips on possible ways I can 'see' what is going
>on under the kitchen floor or other ways I can run these 2 cables?
>
>TIA
>Darren
>
>
>
>
>
>
>
>
>
>
>
>
>
>Yahoo! Groups Links
>
>
>






UKHA_D Main Index | UKHA_D Thread Index | UKHA_D Home | Archives Home

Comments to the Webmaster are always welcomed, please use this contact form . Note that as this site is a mailing list archive, the Webmaster has no control over the contents of the messages. Comments about message content should be directed to the relevant mailing list.