The UK Home Automation Archive

Archive Home
Group Home
Search Archive


Advanced Search

The UKHA-ARCHIVE IS CEASING OPERATIONS 31 DEC 2024


[Message Prev][Message Next][Thread Prev][Thread Next][Message Index][Thread Index]

Re: Electrisave Monitoring Device - A small review


  • Subject: Re: Electrisave Monitoring Device - A small review
  • From: "Gary" <questuk1@xxxxxxxxxxx>
  • Date: Sun, 15 Jan 2006 22:27:33 -0000

Hi David,

Can you email me a link to one on ebay, as there are a lot and can't
see a green one, tried looking for one with pc link but couldn't find one?

Regards=20


Gary=20


--- In ukha_d@xxxxxxx, "David Chapman" <david@m...> wrote:
>
> > Hi David,
> > Whats the min and max Amps resolution (lets say 60w light bulb to
> > immersion heater.. can it display these two accurately?) with the
clamp?
> > Does any part of the meter get hot with running 24/7?
>=20
> Resolution  is 0.1 amp so about 25watt and yes it will sense a
lightbulb=20
> even the fridge/freezer going on and off.  It updates the display
every=20
> second so easy to see changes. Nothing gets hots, it's just a meter
running=20
> from a 9v PSU instead of the normal PP3.
>=20
> Just had a look on Ebay and the meters are even cheaper now, loads
of them=20
> for less that =A310 - they are the dark green ones - just search for
clamp=20
> meter.
>=20
> David C
>








UKHA_D Main Index | UKHA_D Thread Index | UKHA_D Home | Archives Home

Comments to the Webmaster are always welcomed, please use this contact form . Note that as this site is a mailing list archive, the Webmaster has no control over the contents of the messages. Comments about message content should be directed to the relevant mailing list.