The UK Home Automation Archive

Archive Home
Group Home
Search Archive


Advanced Search

The UKHA-ARCHIVE IS CEASING OPERATIONS 31 DEC 2024


[Message Prev][Message Next][Thread Prev][Thread Next][Message Index][Thread Index]

RE: Re: [ADVERT] Internet enabled Central heating controller with 1 wire space temp


  • Subject: RE: Re: [ADVERT] Internet enabled Central heating controller with 1 wire space temp
  • From: "JT @ Home" <Jonathan@xxxxxxxxxxxxxxxx>
  • Date: Tue, 17 Jan 2006 12:34:28 -0000

Sounds really good to me!



What sort of price would one of these be?



Regards,

Jonathan.



_____

From: ukha_d@xxxxxxx [mailto:ukha_d@xxxxxxx] On Behalf Of
ukhauk
Sent: Tuesday, January 17, 2006 12:22 PM
To: ukha_d@xxxxxxx
Subject: [ukha_d] Re: [ADVERT] Internet enabled Central heating controller
with 1 wire space temp



The program at the moment is only configured for one zone and one
temp sensor, but it shouldn't be a problem to change this and add
multiple zones the only limitaion is the number of outputs on the
barionet (2 built in relay outputs volt free and 4 open collector
outputs 24 volt DC 0.1 amp which could drive additional relays) so
six zones.

A frost protection setpoint has already been built in to the software
so that should the space temp fall below say 10 deg C the heating
will be enabled.

Another useful addition might be to monitor the outside temp and
disable the heating if the outside air temp is above say 23 deg C.

Any thoughts or comments'

Jason


--- In ukha_d@xxxxxxx, Kevin Hawkins <lists@u...> wrote:
>
> ukhauk wrote:
> > Additional 1 wire temp sensors can be connected to the Barionet
so
> > you can monitor the temp in various rooms or even outside temp.
> >
> In this scenario would the controller calculate individual
> characteristics for each individual sensor (room) and can you have
> different times/setpoints for each  ? If so yes, very interested...
> >
> >
> >
> > Any thoughts or comments'
> >
> > Jason
> >
> >
>
> Kevin
>











SPONSORED LINKS


Home
<http://groups.yahoo.com/gads?t=ms&k=Home+repair+improvement&w1=Home+repair+
improvement&w2=Computer+stuff&w3=High&w4=Improvement&c=4&s=76&.sig=TcERUCDPQ
cJLbg9mtvQGJQ>  repair improvement

Computer
<http://groups.yahoo.com/gads?t=ms&k=Computer+stuff&w1=Home+repair+improveme
nt&w2=Computer+stuff&w3=High&w4=Improvement&c=4&s=76&.sig=plS9-eUUfaBXyLVFT8
7AJg>  stuff

High
<http://groups.yahoo.com/gads?t=ms&k=High&w1=Home+repair+improvement&w2=Comp
uter+stuff&w3=High&w4=Improvement&c=4&s=76&.sig=b5d547gPx7eFWNGqXQCl7A>


Improvement
<http://groups.yahoo.com/gads?t=ms&k=Improvement&w1=Home+repair+improvement&;
w2=Computer+stuff&w3=High&w4=Improvement&c=4&s=76&.sig=O6pw_oratTOwep2G_91fI
Q>







_____

YAHOO! GROUPS LINKS



*	 Visit your group "ukha_d <http://groups.yahoo.com/group/ukha_d>
"
on the web.

*	 To unsubscribe from this group, send an email to:
ukha_d-unsubscribe@xxxxxxx
<mailto:ukha_d-unsubscribe@xxxxxxx?subject=Unsubscribe>

*	 Your use of Yahoo! Groups is subject to the Yahoo!
<http://docs.yahoo.com/info/terms/>
 Terms of Service.



_____



[Non-text portions of this message have been removed]




UKHA_D Main Index | UKHA_D Thread Index | UKHA_D Home | Archives Home

Comments to the Webmaster are always welcomed, please use this contact form . Note that as this site is a mailing list archive, the Webmaster has no control over the contents of the messages. Comments about message content should be directed to the relevant mailing list.