[Message Prev][Message
Next][Thread Prev][Thread Next][Message
Index][Thread Index]
Re: Coax to BNC connector problem
darren_karp2001 wrote:
> Hi All,
>
> I have already run a length of RG9 75 ohm coax for use with a CCTV
> camera outside and came to put the BNC plug I bought from Maplin on
> when I noticed that the RG9 I have used is ever so slightly too big.
> Upon reading the description on the Maplin website it does in fact
> state that it is for use with RG58 or RG59 cable which I assume is
> slightly smaller than the RG9 cable I've installed.
>
> Maplin don't appear to stock an RG9 BNC plug so does anyone know of
> any source for them?
>
cpc have them by the bucket load.
I've found it's easier to fit an f-type connector, and use f-type to BNC
adapters where needed though...
Jim
UKHA_D Main Index |
UKHA_D Thread Index |
UKHA_D Home |
Archives Home
|